Dimplex Qube Fan Q2TS Instruction Manual
![Dimplex Qube Fan Q2TS Heater manual cover](/images/rYZmPKluAbdRzsqqibjGiEXb/thumbs/thumb175x175.webp)
To set up your Dimplex Qube Fan Q2TS Heater, place it on a flat surface, plug it into a power outlet, and use the control panel to select your desired temperature setting. Ensure the heater is not obstructed and has adequate ventilation.
If your heater doesn't turn on, check if it's properly plugged in and if the outlet has power. Ensure the power switch is in the 'on' position. Additionally, check the circuit breaker and reset it if necessary.
Before cleaning, ensure the heater is unplugged and completely cool. Use a soft, dry cloth to wipe the exterior. Avoid using water or spray cleaners. For the air intake and outlet, use a vacuum cleaner with a brush attachment to remove dust.
Regularly clean the heater's exterior and ensure the air vents are free from dust and debris. Inspect the power cord for any damage and ensure the heater is stored properly when not in use.
It is not recommended to use an extension cord with your heater, as it can lead to overheating and fire hazards. Always plug the heater directly into a wall outlet.
The heater is equipped with an overheat protection feature that automatically turns off the unit if it overheats. It also has a tip-over switch that shuts off the heater if it is knocked over.
If the heater is blowing cold air, check the thermostat setting and ensure it is set to a higher temperature. Also, verify that the heater is not in fan-only mode. If the problem persists, contact customer support.
Some noise is normal as the fan operates to circulate air. However, if you hear unusual sounds like rattling or grinding, inspect the unit for loose parts or debris and ensure it is placed on a stable surface.
Ensure the heater is unplugged and completely cool before storing. Wrap the cord neatly and store the heater in a dry, dust-free environment away from direct sunlight and moisture.
If you suspect that the safety features are not functioning, discontinue use immediately and contact Dimplex customer service for assistance. Do not attempt to repair the heater yourself.