Dimplex PH 075 Instruction Manual

To reset your Dimplex PH 075 Heater, turn off the unit and unplug it from the power outlet. Wait for about 10 minutes to allow it to cool down. Then, plug it back in and turn it on.
Ensure the heater is plugged in securely and the outlet is working. Check the thermostat setting and ensure it is higher than the room temperature. If it still doesn't turn on, inspect the power cord for damage.
Turn off and unplug the heater. Remove the filter cover, take out the filter, and gently vacuum it to remove dust and debris. Replace the filter and cover before using the heater again.
Regularly clean the exterior with a damp cloth, ensure the air intake and outlet are free from obstructions, and periodically check the power cord and plug for damage.
Noise can be due to loose components, debris inside the unit, or a misaligned fan. Turn off the heater and inspect it for visible issues. If the noise persists, consider contacting a service technician.
Ensure doors and windows are closed to prevent heat loss, use the heater in a smaller space for faster warming, and regularly clean the filter and air vents to maintain optimal airflow.
It is not recommended to use extension cords with the Dimplex PH 075 Heater as they can overheat and cause fire hazards. Plug the heater directly into a wall outlet.
The Dimplex PH 075 Heater includes overheat protection, a tip-over switch that turns off the unit if knocked over, and a cool-to-touch exterior to prevent burns.
Turn the thermostat dial to the desired temperature setting. The heater will cycle on and off to maintain the room at the set temperature.
Immediately turn off and unplug the heater. Check for dust or debris on the heating element and clean if necessary. If the smell persists, discontinue use and contact customer service.