Dimplex Futu Rad FutM2TSTi Instruction Manual
![Dimplex Futu Rad FutM2TSTi Radiator manual cover](/images/THjQUVBhyqOwvMOnfxLQUmts/thumbs/thumb175x175.webp)
To set the timer, press the 'Timer' button on the control panel until the desired time is displayed. Use the '+' and '-' buttons to adjust the time settings accordingly.
First, ensure the unit is plugged in and switched on. Check the thermostat setting and increase if necessary. If the problem persists, consult the user manual for troubleshooting tips or contact customer support.
The radiator should not be used in a bathroom unless it is specifically designed for this purpose and installed in compliance with local electrical safety regulations.
To clean the exterior, ensure the radiator is turned off and cool. Use a soft, damp cloth to wipe the surfaces. Avoid using abrasive cleaners or solvents.
Regularly check for dust accumulation and clean the unit as needed. Inspect the power cord for any signs of wear or damage. For comprehensive maintenance, refer to the user manual.
Some noise may occur as the radiator heats up or cools down due to metal expansion and contraction. If the noise is excessive, check for loose parts or contact customer support.
To reset the thermostat, turn the radiator off, unplug it, wait a few minutes, then plug it back in and turn it on. Adjust the thermostat to the desired setting.
The energy consumption varies based on settings and usage. Refer to the specification section of the user manual for detailed energy consumption rates.
Yes, the Dimplex Futu Rad radiator can be wall-mounted. Follow the installation instructions in the user manual to ensure proper and safe mounting.
If the control panel is unresponsive, check the power supply and ensure the unit is properly plugged in. If the issue persists, perform a reset or contact customer support for assistance.