Dimplex ECR15 Instruction Manual
![Dimplex ECR15 Radiator manual cover](/images/IrUhLvEFZggugwogYVJmAOlH/thumbs/thumb175x175.webp)
To install the Dimplex ECR15 Radiator, first ensure that the power supply is turned off. Mount the radiator on the wall using the provided bracket and screws. Connect it to the electrical supply as per the instructions in the user manual. Ensure that the radiator is installed at least 150mm above the floor.
If the radiator does not heat up, check that it is properly connected to the power supply. Ensure the thermostat is set to the correct temperature and that the radiator is in 'On' mode. If the problem persists, consult a qualified electrician to inspect the wiring.
You can adjust the temperature by using the control panel on the radiator. Turn the thermostat dial to set your desired temperature. For more precise settings, refer to the user manual for advanced programming options.
The Dimplex ECR15 Radiator requires minimal maintenance. Regularly clean the exterior with a soft, dry cloth. Ensure that the air vents are not blocked. It is advisable to have a professional check the system annually.
Yes, the Dimplex ECR15 Radiator can be used in a bathroom as it is splash-proof. However, it must be installed in accordance with local safety regulations and not directly exposed to water.
To reset the radiator after a power outage, simply turn the unit off and then back on using the power switch. Check the programmed settings as they may need to be re-entered.
A burning smell can occur when the radiator is used for the first time or after a long period of inactivity. This is normal as dust burns off the heating element. If the smell persists, clean the vents and surfaces, and consult a technician if necessary.
Unusual noises can be due to trapped air or loose components. Check for loose screws or fittings. If the noise continues, bleed the radiator if possible, or contact a service professional for assistance.
To program the timer, access the control panel and navigate to the timer settings. Follow the user manual to set the desired on/off times. Ensure that the clock is set correctly for accurate scheduling.
Yes, it is safe to leave the Dimplex ECR15 Radiator on overnight as it is designed with safety features such as overheat protection. However, ensure it is set to a moderate temperature and the surroundings are free from obstructions.