Dimplex Detroit DTT20 Instruction Manual

To turn on the Dimplex Detroit DTT20 Electric Fire, use the power switch located on the unit. Ensure that the device is plugged in and the main power supply is active.
If the heater function is not working, check if the thermostat is set to a higher temperature than the room. Also, ensure that the unit is not in a drafty area where the thermostat might be reading the wrong temperature.
To clean the Dimplex Detroit DTT20 Electric Fire, first unplug it from the power source. Use a soft, damp cloth to wipe the surfaces. Avoid using harsh chemicals or abrasive materials.
If the flame effect is not visible, check the bulbs inside the unit as they might need replacement. Refer to the user manual for instructions on how to access and change the bulbs.
To adjust the thermostat, turn the dial to the desired temperature setting. The heater will cycle on and off to maintain the set temperature.
Some noise during operation is normal due to the moving parts and fan. However, if you hear unusual sounds, check for any loose parts or debris inside the unit.
It is not recommended to use an extension cord with the Dimplex Detroit DTT20 Electric Fire. For safety reasons, plug the unit directly into a wall outlet.
Regular maintenance is recommended at least once a year. Check the user manual for specific service instructions and consider professional servicing for optimal performance.
If you detect a burning smell, immediately turn off and unplug the unit. Check for any visible damage or debris and consult a professional technician if the problem persists.
To replace the remote control batteries, open the battery compartment on the back of the remote, remove the old batteries, and insert new ones, ensuring correct polarity alignment.