DeLonghi ECAM22.110 Instruction Manual
![DeLonghi ECAM22.110 manual cover](/images/deb6924c478f0f0b8a15eb19/thumbs/thumb175x175.webp)
To descale the DeLonghi ECAM22.110, fill the water tank with a descaling solution and water, place a container under the coffee spout, and follow the descaling instructions in the user manual by pressing the descaling button.
If the machine is not dispensing coffee, check if the water tank is filled, ensure the coffee grounds are not too fine, and clean the coffee spout and filters.
Adjust the coffee strength by turning the aroma control dial located on the front panel to set your preferred coffee strength.
Unusual noises may be due to trapped air in the system. Run a few cycles of hot water through the machine to clear out any air bubbles.
To clean the milk frother, detach it from the machine, rinse it under warm water, and use a small brush to clean the nozzle.
Yes, you can use pre-ground coffee by selecting the ground coffee function and using the ground coffee funnel.
The water filter should be replaced every two months or after making about 100 liters of coffee for optimal performance.
Ensure that the machine has been preheated and check the temperature settings. You can increase the temperature in the menu settings.
If there is water leaking from the bottom, check the water tank for cracks, ensure all parts are correctly positioned, and inspect the drip tray for overflow.
To reset the machine to factory settings, press and hold the menu button until the reset option appears, then confirm the reset process.