DeLonghi DFC60X20G Instruction Manual

To reset the dishwasher, press and hold the "Start/Reset" button for about 3 seconds until the indicator lights turn off. Release the button and then restart the dishwasher.
First, check the filter and drain hose for any blockages. Clean them if necessary. Ensure that the sink drain is not clogged. If the problem persists, consider checking the pump for obstructions.
To clean the filter, remove the lower rack and locate the filter at the bottom of the dishwasher. Twist it counterclockwise to remove it. Rinse it under running water and use a soft brush to remove any debris. Reinstall it by twisting clockwise until it locks into place.
Ensure that the spray arms are not blocked and can rotate freely. Check that the detergent dispenser is working properly and use the recommended amount of detergent. Verify that the water temperature is at least 120°F (49°C) for optimal cleaning.
Inspect the door seal for any damage or debris and clean it if necessary. Check the water inlet valve and hoses for leaks or loose connections. Make sure the dishwasher is level to prevent water from spilling over the edge.
Error code E4 typically indicates a water overflow issue. Turn off the water supply and power to the appliance. Check for blockages in the filter and drain hose. If the issue persists, contact a professional technician.
It is recommended to descale your dishwasher every 3 to 6 months, depending on the hardness of your water. Use a dishwasher-safe descaling agent and follow the manufacturer's instructions.
No, regular dish soap should not be used in a dishwasher as it can cause excessive suds and potentially damage the appliance. Use only dishwasher-specific detergents and rinse aids.
To adjust the water hardness setting, consult the user manual for instructions specific to your model. Typically, this involves pressing and holding specific buttons to navigate through the settings menu.
Check if the racks are properly aligned and not obstructing the door. Inspect the door latch and hinges for damage. Ensure that no large items are preventing the door from sealing. If adjustments don't work, consult a professional technician.