DeLonghi DDWTT17 Instruction Manual
![DeLonghi DDWTT17 manual cover](/images/SdFUwOVGYqlZYnuSwxtGaccz/thumbs/thumb175x175.webp)
To start a wash cycle, ensure the dishwasher is loaded and the door is closed. Select the desired cycle using the control panel, then press the 'Start' button. The LED indicator will light up, and the cycle will begin.
If the dishwasher does not drain, check for blockages in the filter or drain hose. Ensure that the sink drain is not clogged. If the issue persists, consult the user manual for further troubleshooting steps or contact customer support.
To clean the filter, remove the bottom dish rack and locate the filter at the base of the dishwasher. Turn the filter counterclockwise to remove it. Rinse the filter under running water to remove debris, then reinstall it by turning it clockwise until secure.
Ensure that the dishwasher is not overloaded and that dishes are positioned correctly. Check that the spray arms can rotate freely and are not obstructed. Also, verify that you are using the appropriate amount of detergent for the water hardness in your area.
Place large items like pots and pans on the lower rack, while cups, glasses, and smaller items should be placed on the upper rack. Ensure that all items are angled downwards to allow water to drain off effectively. Avoid blocking the spray arms.
To reset the dishwasher, turn it off by pressing the 'Power' button. Wait for about a minute, then turn it back on. If the problem persists, consult the user manual or contact customer service for assistance.
Yes, tablet detergents can be used in the DeLonghi DDWTT17 Dishwasher. Place the tablet in the detergent dispenser and ensure it is properly closed before starting the cycle.
Regular maintenance includes cleaning the filter, checking and cleaning the spray arms, and wiping down the door seals. Periodically inspect the drain hose for blockages and ensure the dishwasher is level.
To adjust the rinse aid settings, open the dishwasher door and locate the rinse aid dispenser. Turn the dial to increase or decrease the amount of rinse aid dispensed per cycle. Refer to the user manual for recommended settings based on water hardness.
Unusual noises may be caused by items touching the spray arms or dishes not being secured properly. Check for loose cutlery or dishware and ensure spray arms are unobstructed. If noise persists, inspect the pump and motor for any issues.