DeLonghi DDW60S16 Instruction Manual
![DeLonghi DDW60S16 manual cover](/images/fsgcqtbWVNCLgFUDdEBpUpfd/thumbs/thumb175x175.webp)
To reset your DeLonghi DDW60S16 dishwasher, press and hold the Start/Pause button for about 3 seconds until the indicator lights change. This will reset the dishwasher and clear any previous settings.
Ensure the dishwasher is properly plugged in and the door is firmly closed. Check the circuit breaker or fuse box for any tripped breakers or blown fuses. Make sure the water supply valve is open.
Check for clogs in the drain hose or filter. Clean the filter located at the bottom of the dishwasher. Also, ensure the drain hose is not kinked or blocked.
To clean the filter, remove the lower dish rack and unscrew the filter unit located at the bottom. Rinse it under running water and use a soft brush to remove debris. Reassemble the filter before using the dishwasher again.
For heavily soiled dishes, use the Intensive cycle. This setting uses higher temperatures and extended washing time to effectively clean tough stains and stuck-on food.
To prevent spots on glassware, use a rinse aid to help water sheet off surfaces. Also, ensure the dishwasher salt compartment is filled to prevent water hardness from affecting the wash quality.
Yes, but place plastic items on the top rack to avoid direct exposure to the heating element. Use a lower temperature setting to prevent warping. Check that the items are labeled dishwasher-safe.
Clean the dishwasher every month to maintain optimal performance. This includes cleaning the filter, wiping down the door seals, and running an empty cycle with a dishwasher cleaner.
Check the door seal for damage or debris and clean it if necessary. Ensure the dishwasher is level and not overloaded. Inspect the hoses for leaks or loose connections.
Ensure the rinse aid dispenser is filled, as this helps with drying. Select a higher temperature drying cycle and slightly open the door after the cycle completes to release steam.