DeLonghi DDW45S19 Instruction Manual
![DeLonghi DDW45S19 manual cover](/images/KiOKUAdzREZHhtlgrLpEEfFq/thumbs/thumb175x175.webp)
To reset the DeLonghi DDW45S19 Dishwasher, unplug the appliance from the power source for about 1 minute. Plug it back in and select your desired wash cycle.
Ensure that the dishwasher is properly plugged in and the door is securely closed. Check if the water supply is turned on and that the control panel settings are correct.
Remove the bottom rack to access the filter. Turn the filter counterclockwise and lift it out. Rinse it under running water to remove debris, then reinstall it by turning it clockwise until it locks in place.
Check if the rinse aid dispenser is filled. Ensure that you are using the appropriate drying cycle. Also, avoid overcrowding the dishwasher, which can impede airflow.
Error code E4 indicates a water overflow issue. Check for any blockages in the drain hose or filter, and ensure the drain pump is functioning correctly.
Clean the spray arms every 3 to 6 months to ensure optimal performance. Remove them and rinse under warm water, clearing any blockages with a toothpick if necessary.
Use a high-quality dishwasher detergent, preferably in tablet or powder form, to ensure effective cleaning and maintenance of the dishwasher.
Consult the user manual to access the control panel settings. Adjust the water hardness setting according to your local water supply, using the buttons on the panel.
Clean the filter and spray arms, and run an empty cycle with a dishwasher cleaner or a cup of white vinegar placed on the top rack to eliminate odors.
Ensure that you are using the correct amount of detergent and that the rinse aid dispenser is filled. Avoid washing soft water-sensitive glassware in hard water conditions without adjustment.