DeLonghi DDW2PO20 Instruction Manual
![DeLonghi DDW2PO20 manual cover](/images/OmSxDiqkakNGSJrkzskmeAIN/thumbs/thumb175x175.webp)
To reset the DeLonghi DDW2PO20 Dishwasher, press and hold the start button for about 5 seconds until the display shows a reset message. Release the button and allow the dishwasher to restart.
Check the drain hose for any clogs or kinks. Ensure that the garbage disposal, if connected, is clear. Clean the dishwasher filter and make sure the sink drain is not blocked.
Spots on glasses can be caused by hard water. Use a rinse aid to improve drying and reduce spotting. Ensure that the dishwasher salt compartment is filled if your model has one.
Remove the lower dish rack to access the filter. Twist the filter counterclockwise and lift it out. Rinse it under running water and use a soft brush to remove debris. Reinstall by placing it back and twisting clockwise.
For heavily soiled pots and pans, use the 'Intensive' or 'Heavy' wash cycle. These cycles use higher temperatures and stronger water pressure to clean stubborn stains effectively.
Clean the filter and ensure the drain is not clogged. Run an empty wash cycle with a cup of white vinegar placed on the top rack to eliminate odors. Regularly check and clean the door seal and interior surfaces.
Ensure that the door is fully closed and latched. Check if the delay start option is activated by accident. Verify that the water supply is turned on and that the control panel is not locked.
It is recommended to clean the spray arms every 3-6 months. Remove them by unscrewing the nut or clip that holds them in place. Rinse under water and use a toothpick to clear any blocked holes.
Yes, you can wash plastic items, but ensure they are dishwasher safe. Place them on the top rack to avoid melting or warping from the heating element.
Regularly clean the filter, spray arms, and door seals. Use a dishwasher cleaner monthly to remove buildup. Check hoses and connections for leaks, and use the appropriate detergent and rinse aid.