DeLonghi DDW2PO19 Instruction Manual
![DeLonghi DDW2PO19 manual cover](/images/BSkeLbMwedQbNELSTWVdaNxf/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher with your dishes, add detergent, select the desired wash program using the control panel, and press the start button. Ensure the door is securely closed to initiate the cycle.
First, check if the drain hose is kinked or clogged. Ensure the sink drain is not blocked. Clean the dishwasher filter and remove any debris. If the problem persists, consult the user manual or contact customer support.
It is recommended to clean the filter once a month to ensure optimal performance. Remove the filter, rinse it under running water, and use a soft brush to remove any stubborn residue.
Use a high-quality dishwasher detergent in tablet, powder, or gel form. Avoid using regular dish soap as it can cause excessive sudsing and potential damage to the appliance.
Ensure you are using a rinse aid, as it helps in reducing water spots. Adjust the rinse aid dispenser setting if necessary, and make sure the water temperature is set to the recommended level.
Check if the dishwasher is properly plugged in and the door is fully closed. Verify that the circuit breaker is not tripped. If the issue continues, refer to the troubleshooting section of the user manual.
Ensure you are using a rinse aid and select a drying option if available. Loading the dishes properly to allow air circulation can also enhance drying results.
Regularly clean the filter, inspect and clean the spray arms, check the door seals for debris, and wipe down the interior with a damp cloth. Run a cleaning cycle with a dishwasher cleaner every few months.
Yes, you can wash plastic items, but ensure they are labeled dishwasher-safe. Place them on the top rack to prevent warping from the heating element.
To reset the dishwasher, press and hold the start button for a few seconds until the display clears. Alternatively, consult the user manual for specific reset instructions.