DeLonghi D914PWM20 Instruction Manual

To properly load the DeLonghi D914PWM20, distribute clothes evenly around the drum. Avoid overloading and mix large and small items to balance the load. This will help prevent excessive vibration and ensure efficient cleaning.
If the machine does not start, check if it is plugged in and switched on. Ensure the door is closed properly and the water supply is turned on. Also, verify if the child lock feature is activated, which might prevent operation.
To clean the detergent drawer, remove it by pulling it out and pressing the release lever. Rinse under warm water to remove detergent residues. Use a soft brush for stubborn deposits, and dry thoroughly before reinserting.
Ensure that the drain hose is not kinked or blocked. Check the pump filter for obstructions and clean it if necessary. If the problem persists, there might be an internal blockage or pump failure requiring professional service.
Regular maintenance should be performed monthly, including cleaning the detergent drawer, checking the pump filter for blockages, and running a drum cleaning cycle with a washing machine cleaner.
The DeLonghi D914PWM20 offers various programs such as cotton, synthetics, delicates, and wool. Choose the program based on the fabric type and soil level. Refer to the user manual for a detailed description of each program.
Ensure the washing machine is level by adjusting the feet. Check that the load is balanced and avoid overloading. Use the appropriate wash cycle for the fabric type to minimize noise and vibration.
Wait a few minutes for the door lock to release after the cycle ends. If it remains locked, ensure the drum is completely drained. If necessary, turn off the machine, unplug it, and wait 5-10 minutes before trying again.
Yes, but use a specific program for waterproof items, if available. Avoid using high spin speeds as they can damage the waterproof material. Always check the care label on the items before washing.
To reset the washing machine, turn it off and unplug it from the power source. Wait for a few minutes before plugging it back in. Turn the machine on and select the desired program to see if the issue is resolved.