DeLonghi D714PWM20 Instruction Manual

To start a washing cycle, first load your laundry into the drum. Add detergent to the dispenser drawer. Select the desired washing program using the program dial. Press the 'Start/Pause' button to begin the cycle.
If the machine is not draining, check if the drain hose is kinked or clogged. Ensure the filter is clean. If the problem persists, there may be an issue with the pump, and you should contact customer support.
Ensure the washing machine is level by adjusting the feet. Avoid overloading the drum and evenly distribute laundry inside the drum.
Clean the detergent drawer and filter monthly. Check and clean the door seal to prevent mold buildup. Run a maintenance wash with a washing machine cleaner every few months.
After selecting your wash program, press the 'Delay Start' button to set the desired time delay. Confirm your selection and press 'Start/Pause' to activate the delay.
Run an empty hot water cycle with a washing machine cleaner or vinegar. Leave the door open after washes to allow the drum to dry out. Regularly clean the door seal and detergent drawer.
Ensure the machine is plugged in and the power socket is functional. Check if the door is properly closed. Verify the water supply is on and the program is selected.
Locate the filter cover at the bottom of the machine, open it, and unscrew the filter. Remove any debris and rinse it under water before replacing it securely.
Refer to the user manual for specific error code meanings. Common codes indicate issues like water supply problems, drainage issues, or door lock malfunctions.
Pre-treat stains before loading them into the washing machine. Use the intensive or heavy-duty cycle and ensure to use the recommended amount of detergent.