DeLonghi D712WM16 Instruction Manual
![DeLonghi D712WM16 manual cover](/images/gQrCbdPqLEOXMoaHaLcQzPfG/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, close the door, select the desired wash program using the control knob, and press the start button.
Check if the drain hose is kinked or blocked. Also, ensure that the drain filter is clean and not obstructed. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residue and use a soft brush for hard-to-reach areas.
Regularly clean the drum, door seal, and detergent drawer. Check and clean the drain filter every few months, and ensure the machine is level to prevent excessive vibration.
Ensure the washing machine is level by adjusting the feet. Verify that the load is balanced and not too small or too large. Redistribute the laundry if necessary.
Ensure that the water supply is turned on and the inlet hose is not kinked. Check the filter in the inlet valve for blockages. If the issue continues, contact customer support.
To prevent tangling, wash similar fabric types together, avoid overloading the drum, and use a suitable wash cycle for delicate items.
Error code E04 indicates a drain problem. Check if the drain hose is blocked or the drain pump is malfunctioning. Clean the filter and consult the manual for further instructions.
It is recommended to clean the drum once a month. Run an empty cycle with hot water and a cup of white vinegar or a washing machine cleaner to remove residue and odors.
Yes, you can wash wool items using the dedicated wool cycle. Use a mild detergent suitable for wool and follow the care label instructions on your garments.