De Dietrich DRS923JE User Guide
![De Dietrich DRS923JE Refrigerator manual cover](/images/PpcANjkbQXCgdAOJWptUrclg/thumbs/thumb175x175.webp)
To set the temperature, locate the control panel inside the refrigerator. Use the up and down arrows to adjust the temperature to the desired setting. Refer to the user manual for recommended temperature settings.
First, check if the refrigerator is plugged in and the power is on. Ensure the temperature settings are correct. Clean the condenser coils and check the door seals for any gaps or damage. If the problem persists, contact a qualified technician.
The De Dietrich DRS923JE Refrigerator is equipped with an automatic defrosting system. However, if you notice frost buildup, manually defrost by unplugging the unit and allowing the ice to melt. This should be a rare necessity.
Ensure the refrigerator is level and not touching any walls or cabinets. Check if the internal components are securely fastened. If the noise persists, it may be due to normal compressor operation or ice maker function.
Unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to clean the interior surfaces and shelves. Wipe dry with a soft cloth before plugging it back in. Avoid using abrasive cleaners.
Locate the water filter compartment, typically inside the refrigerator or at the base. Turn the old filter counterclockwise to remove it, then insert the new filter by turning it clockwise until secure. Run water through the dispenser for a few minutes to clear air and impurities.
This could be due to a blocked defrost drain. Clear any debris or ice blocking the drain hole located at the back of the refrigerator. If the issue persists, check the door seals and ensure the refrigerator is level.
Keep the refrigerator away from heat sources and out of direct sunlight. Ensure the door seals are intact and minimize the time the door is open. Set the temperature to the recommended level for optimal efficiency.
Check if the ice maker is turned on and the water supply is connected. Make sure the freezer is set to the correct temperature. If the ice maker is still not working, inspect for ice jams or call a service technician for further assistance.
After a power outage, allow the refrigerator to stabilize for a few minutes. If needed, adjust the temperature settings. Verify that the compressor is running and the interior light is functioning. No further reset is typically required.