De Dietrich DPV7650B User Guide
![De Dietrich DPV7650B Hob manual cover](/images/dfuRlyXxJUPBbEsZDGVDJPWZ/thumbs/thumb175x175.webp)
To unlock the control panel, press and hold the lock button for a few seconds until the lock indicator turns off. This will allow you to use the hob controls again.
First, check that the hob is properly connected to the power supply. Ensure that the circuit breaker has not tripped. If the problem persists, contact a qualified technician for further diagnosis.
Allow the hob to cool down, then use a soft cloth or sponge with a ceramic hob cleaner. Avoid using abrasive pads or cleaners that might scratch the surface.
A clicking noise is normal and is typically caused by the electronic components of the hob as they switch power settings. If the noise is excessive, consult the user manual or contact customer support.
Before the first use, remove any protective films and clean the surface with a damp cloth. Familiarize yourself with the control panel and safety features by reading the user manual.
After a power outage, the hob may need to be reset. Simply turn the appliance off and on again at the main power switch. If issues persist, consult a technician.
Yes, cast iron cookware can be used, but ensure it has a flat base to avoid scratching the ceramic surface. Always lift the cookware rather than sliding it across the hob.
Error code F0 typically indicates a problem with the touch controls. Try resetting the hob by turning it off and on. If the error persists, contact customer support for assistance.
Press the timer button, then use the plus and minus buttons to set the desired cooking time. The timer will start automatically and notify you when the time has elapsed.
Keep the ventilation areas clear of obstructions. Regularly check and clean any accessible openings with a soft brush to ensure proper airflow.