De Dietrich DRS917JE User Guide
![De Dietrich DRS917JE Refrigerator manual cover](/images/mIUrBazzFEprtmyWooieNWhE/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature control buttons to set your desired temperature for both the fridge and freezer compartments.
First, check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the vents inside the refrigerator are not blocked. If the issue persists, consider cleaning the condenser coils or contacting a professional technician.
To defrost the freezer, remove all contents and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. You can place towels around the base to absorb water. Once defrosted, clean and dry the interior before plugging the refrigerator back in.
Water pooling could be due to a blocked defrost drain. Check and clean the defrost drain located inside the refrigerator at the back. Use warm water to clear any blockages.
Regular maintenance includes cleaning the condenser coils every six months, checking door seals for any damage, and ensuring the refrigerator is level to prevent cooling issues.
To replace the light bulb, unplug the refrigerator and locate the bulb cover inside. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover and plug the refrigerator back in.
To improve energy efficiency, ensure the door seals are tight, avoid placing hot food directly inside, and keep the refrigerator stocked to maintain a stable temperature. Also, clean the coils regularly to ensure optimal performance.
Unusual noises may indicate an issue with the fan or compressor. First, ensure the refrigerator is level and not touching the wall. If the noise persists, contact a professional technician for diagnosis and repair.
Yes, you can change the door opening direction by following the instructions in the user manual. This typically involves unscrewing the door hinges, repositioning them on the opposite side, and reattaching the door.
To reset the alarm, press the alarm reset button on the control panel. If the alarm continues to sound, check for any obstructions in the door seal or ensure the door is fully closed.