De Dietrich DRS635JE User Guide

To change the temperature settings, locate the control panel inside the fridge. Use the '+' and '-' buttons to adjust the temperature to your desired level. The recommended setting for the fridge is 4°C.
First, ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check if the temperature settings are correct. Clean the condenser coils, and ensure there is adequate ventilation around the appliance. If the issue persists, contact a qualified technician.
The De Dietrich DRS635JE Refrigerator is equipped with a No Frost system, so manual defrosting is not required. However, it is advisable to clean the appliance every six months to maintain optimal performance.
Unusual noises can be caused by items inside the refrigerator vibrating, the appliance not being level, or the compressor starting and stopping. Ensure the appliance is level and check that items inside are not touching each other or the walls.
To replace the light bulb, first unplug the refrigerator. Locate the light cover inside the fridge and remove it by turning it counterclockwise. Replace the bulb with a new one of the same type and wattage, and reattach the cover.
To clean the condenser coils, unplug the refrigerator and move it away from the wall. Locate the coils at the back or bottom of the appliance. Use a vacuum cleaner or a brush to remove dust and debris from the coils. Reposition the refrigerator and plug it back in.
If the alarm sounds, it indicates a temperature issue. Check that the door is closed properly and the temperature settings are correct. To reset the alarm, press the alarm button on the control panel.
Water pooling can be due to a blocked defrost drain. To fix this, locate the drain inside the fridge and clear any blockage with a mixture of warm water and baking soda. Regular cleaning can prevent this issue.
Improve energy efficiency by ensuring the refrigerator is not placed near heat sources, keeping the door closed as much as possible, and maintaining the recommended temperature settings. Regularly cleaning the condenser coils also helps.
If the door seal is damaged, it should be replaced to ensure proper sealing and efficiency. You can order a replacement seal from the manufacturer or a parts supplier. Remove the old seal and install the new one by pressing it into the groove around the door.