De Dietrich DRS314JE1 User Guide

To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature control buttons to set your desired temperature. Refer to the user manual for specific button descriptions and optimal temperature ranges.
First, check if the refrigerator is plugged in and the power is on. Ensure that the temperature settings are correct. Clean the condenser coils and ensure that the door seals are tight. If the issue persists, consider calling a qualified technician.
The De Dietrich DRS314JE1 is equipped with an automatic defrost feature. However, if you notice excessive frost buildup, manually defrost it by unplugging the unit and allowing the ice to melt. This should be done as needed.
To clean the interior, remove all food items and detachable shelves. Use a solution of mild soap and warm water to wipe the surfaces. Rinse with clean water and dry with a soft cloth. Regular cleaning helps maintain hygiene and efficiency.
Unusual noises may be caused by the refrigerator not being level, items inside vibrating, or the compressor running. Ensure the appliance is level, securely position items inside, and check for any loose parts. Contact a technician if the noise persists.
To change the light bulb, unplug the refrigerator and locate the light cover. Remove the cover, unscrew the old bulb, and replace it with a new one of the same type and wattage. Replace the cover and plug the refrigerator back in.
Water pooling can be due to a blocked defrost drain. Clear the drain using a pipe cleaner or warm water. Ensure the refrigerator is level to prevent water from not draining properly.
To improve energy efficiency, keep the refrigerator away from heat sources, ensure the door seals are tight, avoid keeping the door open for extended periods, and set the temperature to the recommended settings. Regular maintenance also helps.
Check for obstructions in the door seal or on the shelves. Ensure the refrigerator is level, and inspect the door gasket for damage. Replace the gasket if necessary to ensure a proper seal.
After a power outage, simply plug the refrigerator back in and check the temperature settings. Adjust if necessary. Allow the unit some time to reach the desired temperature. If issues occur, refer to the manual or contact support.