De Dietrich DRS1204J User Guide
![De Dietrich DRS1204J Refrigerator manual cover](/images/FJhFlLLDLNiloFdelVLSvzMT/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the digital control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the fridge and freezer compartments.
First, ensure the refrigerator is plugged in and the power is on. Check the temperature settings and adjust if necessary. Clean the condenser coils at the back of the unit and make sure the door seals are not damaged. If the issue persists, contact a professional technician.
The De Dietrich DRS1204J features a no-frost technology, so manual defrosting is not required. However, if frost builds up, check for issues with the door seal or temperature settings.
Yes, the doors on the De Dietrich DRS1204J are reversible. Refer to the user manual for detailed instructions or contact customer service for professional assistance.
To clean or replace the water filter, locate it inside the refrigerator compartment. Turn the filter counterclockwise to remove it, then clean or replace it as necessary. Follow the manufacturer's guidance for cleaning methods.
The De Dietrich DRS1204J refrigerator uses R600a refrigerant, which is environmentally friendly and efficient.
Ensure the refrigerator is level and not touching any surrounding surfaces. Check the condenser fan and evaporator fan for obstructions or wear. If the noise persists, consult a technician.
Regularly clean the condenser coils, check and clean door seals, and replace water filters as needed. Perform a general cleaning of the interior and exterior surfaces every few months.
To reset the alarm, press the alarm reset button on the control panel. If the alarm continues, check for door closure and temperature issues.
Condensation can occur if the door is frequently opened or not closed properly. Check the door seals for damage and ensure the refrigerator is set to the correct temperature.