De Dietrich DRS1132I User Guide
![De Dietrich DRS1132I Refrigerator manual cover](/images/MCtCdrGYAIJIhWvALdHyAOte/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature adjustment buttons to set your desired temperature. The recommended temperature is around 37°F (3°C) for the refrigerator compartment.
First, check if the refrigerator is plugged in and the power is on. Make sure the vents inside the refrigerator are not blocked by food items. Verify that the door seals are clean and not damaged. If the issue persists, consider contacting a professional technician.
It's recommended to clean the condenser coils at least twice a year to ensure efficient operation. Use a vacuum cleaner or a brush to remove dust and debris from the coils.
Water pooling can be caused by a blocked defrost drain. To fix this, try cleaning the drain hole located at the back of the refrigerator. You can use a pipe cleaner or a turkey baster with warm water to clear the blockage.
To change the light bulb, first unplug the refrigerator. Locate the light cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same wattage and screw the cover back on.
Unusual noises can be caused by the refrigerator not being level, items inside vibrating, or the compressor. Check the leveling, rearrange the items, and if the noise continues, contact a technician.
Ensure the door seals are tight and not leaking air, keep the refrigerator away from heat sources, and do not overload it. Regularly cleaning the condenser coils also helps improve efficiency.
After a power outage, wait for the power to return and then check the control panel to ensure the settings are correct. If necessary, adjust the temperature settings back to your preferred levels.
Regular maintenance tasks include cleaning the condenser coils, checking and cleaning door seals, ensuring proper airflow inside, and defrosting if necessary.
To defrost, remove all items from the freezer, unplug the refrigerator, and leave the door open to allow the ice to melt. Clean up any water and dry the compartment before plugging the refrigerator back in.