De Dietrich DRS1122J User Guide
![De Dietrich DRS1122J Refrigerator manual cover](/images/MaiDUcVYulzdYdzBCVazIfiI/thumbs/thumb175x175.webp)
To change the temperature settings, locate the temperature control panel inside the refrigerator. Use the '+' and '-' buttons to adjust the temperature to your desired setting.
Check if the refrigerator is plugged in and the power is on. Ensure the temperature setting is correct. Clean the condenser coils and make sure the door seals are tight. If the problem persists, contact customer service.
The De Dietrich DRS1122J Refrigerator is equipped with an automatic defrost system, so manual defrosting is not necessary under normal conditions.
Use a mixture of warm water and mild detergent to clean the interior. Avoid using abrasive cleaners or solvents. Rinse with clean water and dry with a soft cloth.
Ensure the door is closed properly and not left open for extended periods. Check that the door seals are intact and not damaged. Keep the refrigerator at the recommended temperature setting.
Unusual noises can be due to the refrigerator not being level. Check and adjust the leveling feet if necessary. Ensure nothing inside the refrigerator is vibrating against other items.
First, unplug the refrigerator. Locate the light cover inside the refrigerator, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage. Reattach the cover and plug the refrigerator back in.
The recommended temperature setting for the refrigerator compartment is between 3°C and 5°C. Adjust the settings based on your specific needs and the ambient temperature of your kitchen.
Check the door seals regularly for cracks or tears. You can perform a simple test using a piece of paper: close the door with the paper trapped inside. If it pulls out easily, the seal may need to be replaced.
It is recommended to cool hot food to room temperature before storing it in the refrigerator to prevent raising the internal temperature and reduce energy consumption.