Crosley CF3116 Instructions Manual
![Crosley CF3116 Pantry manual cover](/images/tkqiLIXAhUlxzOmrlcfDneAE/thumbs/thumb175x175.webp)
To adjust the shelves, gently lift the shelf up and remove it from the support pegs. Reposition the pegs at the desired height and place the shelf back on the pegs. Ensure the shelf is level and securely in place.
Clean the pantry using a soft, damp cloth and mild detergent. Avoid using abrasive cleaners or harsh chemicals. Wipe down all surfaces and ensure they are dry before restocking the pantry.
Apply a small amount of lubricant, such as WD-40, to the door hinges. Open and close the door several times to distribute the lubricant evenly and eliminate the squeak.
Check for obstructions in the door's path and ensure the shelves are properly aligned. If the issue persists, adjust the door hinges by loosening the screws slightly, repositioning the door, and tightening the screws.
To change the handles, unscrew the existing ones from the inside of the door using a screwdriver. Align the new handles with the pre-drilled holes and secure them with screws. Make sure they are tightly fastened.
Each shelf in the Crosley CF3116 Pantry is designed to hold up to 20 pounds. Distribute weight evenly across the shelves and avoid overloading to maintain structural integrity.
Ensure proper ventilation in the pantry and regularly clean the interior surfaces. Use moisture absorbers or silica gel packs to help control humidity levels. Promptly clean up any spills to prevent mold growth.
LED strip lights are recommended for use inside the pantry as they provide efficient lighting with minimal heat output. Ensure any lighting used is properly installed and does not obstruct shelf space.
Follow the assembly instructions provided in the manual, ensuring all parts are accounted for. Use the recommended tools and hardware, and assemble the pantry on a flat surface for best results.
Remove items from the sagging shelf and check for any damage or misalignment. If the shelf is damaged, consider replacing it. Ensure the support pegs are properly aligned and not bent or broken.