Casio DQ950 Operation Guide
![Casio DQ950 Clock manual cover](/images/FmbySQEIGrtdpzTXbfXBgMZv/thumbs/thumb175x175.webp)
To set the time on your Casio DQ950 Clock, press and hold the 'Set' button until the time starts blinking. Use the 'Up' and 'Down' buttons to adjust the hours and minutes. Press 'Set' again to confirm the time.
Ensure that the clock is set to the correct time zone and that the Daylight Saving Time (DST) setting is correct. Replace the battery if the clock is running slow or not keeping time.
To change the alarm time, press the 'Alarm Set' button until the alarm time starts blinking. Adjust the time using the 'Up' and 'Down' buttons, then press 'Alarm Set' again to save the changes.
If the display is dim, replace the battery as it may be depleted. Ensure the clock is not exposed to extreme temperatures which can affect display visibility.
To enable or disable the snooze function, press the 'Snooze' button. The snooze function is active when the snooze indicator is visible on the display.
The beeping noise may be the alarm. To stop it, press any button on the clock. If the noise is continuous, check if the alarm is set and disable it.
To reset the clock to factory settings, remove the battery and leave it out for a few minutes. Reinsert the battery and set the time and alarm again.
If your clock is losing time, it may be due to a weak battery. Replace the battery with a new one. If the issue persists, there might be an internal fault that requires professional repair.
Yes, the Casio DQ950 Clock can display time in 24-hour format. To switch formats, press and hold the 'Set' button while the time is displayed and toggle between 12-hour and 24-hour formats.
To replace the battery, open the battery compartment on the back of the clock, remove the old battery, and insert a new one, ensuring the correct polarity. Close the compartment securely.