Carlton PAC5500 User Manual
![Carlton PAC5500 manual cover](/images/jCAgnMxhBcHPxurEFIZnSJjZ/thumbs/thumb175x175.webp)
To set the timer, press the 'Timer' button on the remote. Use the '+' and '-' buttons to set the desired time. Confirm by pressing the 'Timer' button again.
Ensure that the temperature setting is correct and that doors and windows are closed. Check and clean the air filter if necessary. Also, verify that the unit is not obstructed.
Turn off the unit and unplug it. Open the front panel and remove the filter. Use a vacuum or wash it with lukewarm water, then let it dry completely before reinstalling.
The 'E1' error code indicates a sensor issue. Try resetting the unit by unplugging it for a few minutes. If the error persists, contact customer support.
Yes, the PAC5500 can be used in high humidity, but it may require more frequent drainage of the water tank to maintain efficiency.
Press the 'Mode' button on the remote control to cycle between cooling, fan, and dehumidification modes.
Regularly clean the air filter, check the condenser coils for dust build-up, and ensure the drainage system is clear. Perform these checks monthly.
Locate the drainage plug at the bottom of the unit, place a container underneath, and remove the plug to let the water flow out. Replace the plug securely afterward.
The PAC5500 does not support smartphone app control. It is operated via the included remote control.
The Carlton PAC5500 is suitable for rooms up to 450 square feet, depending on the insulation and number of windows.