Carlton EF1000 User Manual
![Carlton EF1000 manual cover](/images/LaYfwhkBuaGRFuKQKSauAKra/thumbs/thumb175x175.webp)
To turn on the Carlton EF1000 Heater, ensure it is plugged into a power outlet. Then, press the power button located on the top panel of the heater. Adjust the temperature settings using the control dial.
To clean the heater, first ensure it is unplugged and completely cool. Use a soft, damp cloth to wipe the exterior. Avoid using abrasive cleaners or immersing the heater in water.
The noise could be due to the expansion and contraction of heating elements. If the noise is excessive, inspect for loose parts or debris inside the unit. Contact customer service if the issue persists.
To reset the heater, unplug it for about 10 minutes, then plug it back in. Turn the unit on and set your desired temperature.
The Carlton EF1000 Heater includes an overheat protection system, a tip-over switch, and a safety cut-off feature to prevent accidents and ensure safe operation.
It is not recommended to use an extension cord with the heater as it may cause overheating or electrical hazards. Plug the heater directly into a wall outlet.
Check that the heater is properly plugged into a working outlet. Ensure that the power switch is in the 'on' position and the thermostat is set to a temperature above the room temperature. If it still doesn't turn on, check the circuit breaker or contact support.
Yes, the Carlton EF1000 Heater features an adjustable thermostat. Use the control dial to set your desired temperature level, and the heater will maintain that temperature.
Inspect the heater at least once a season, before winter use, for any signs of damage or dust accumulation. Regularly check the power cord and plug for wear and tear.
If the heater overheats, it will automatically shut off. Allow it to cool down completely, inspect for any blockages in airflow, and ensure the ventilation is clear before turning it back on.