Cadillac XT5 2021 Owner's Manual
![Cadillac XT5 2021 manual cover](/images/ZtbtzHuCTDaUvDeDoMSeodIz/thumbs/thumb175x175.webp)
To connect your smartphone via Bluetooth, go to the infotainment system's home screen, select 'Phone', then 'Connect Phone'. Follow on-screen prompts to pair your device. Ensure Bluetooth is enabled on your smartphone.
The recommended tire pressure for the Cadillac XT5 2021 is typically 35 PSI for both front and rear tires. Always check the owner's manual or the tire information placard on the driver's side doorjamb for accurate specifications.
To reset the oil life monitor, turn the ignition to 'On', without starting the engine. Use the DIC controls on the steering wheel to navigate to the 'Oil Life' screen, then press and hold the 'Set/Reset' button until the percentage resets to 100.
The Cadillac XT5 2021 typically requires SAE 5W-30 full synthetic oil. Refer to the owner's manual for any specific brand recommendations or viscosity adjustments based on climate.
To adjust the head-up display, use the control buttons located on the left side of the dashboard. You can adjust the position, brightness, and information displayed on the HUD.
The Cadillac XT5 2021 has a towing capacity of up to 3,500 pounds when properly equipped with the available towing package.
To perform a factory reset, go to the 'Settings' menu on the infotainment screen, select 'System', then 'Return to Factory Settings'. Follow the prompts to complete the reset.
The rear cross-traffic alert is typically activated by default. To ensure it is turned on, go to the 'Settings' menu in the infotainment system, select 'Vehicle', then 'Collision/Detection Systems', and ensure the feature is enabled.
If the check engine light comes on, first check if the gas cap is securely tightened. If the light remains on, schedule a service appointment with a certified Cadillac technician to diagnose the issue.
To change the cabin air filter, locate the filter housing behind the glove box. Open the glove box, remove the retaining arm, and lower the glove box door. Remove the filter cover and replace the old filter with a new one. Reassemble the glove box components.