Cadillac XLR 2004 Owner's Manual
![Cadillac XLR 2004 manual cover](/images/LWiwMFKvDehbUrWpFRSqGrnD/thumbs/thumb175x175.webp)
The recommended oil type for a 2004 Cadillac XLR is 5W-30 synthetic oil. Always refer to the owner's manual for confirmation.
To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Press the "Information" and "Reset" buttons on the steering wheel simultaneously until the "Oil Life Reset" message is displayed.
The recommended tire pressure for the 2004 Cadillac XLR is 30 psi for both front and rear tires. Always check the tire placard located on the driver's door jamb for precise specifications.
If your 2004 Cadillac XLR won't start, check the battery connections, ensure the battery is charged, verify the fuel level, and inspect the starter and ignition system. If issues persist, consult a professional mechanic.
If the navigation system is not working, try resetting the system by disconnecting the battery for a few minutes. If the issue continues, the system might need software updates or professional service.
It is recommended to change the transmission fluid every 50,000 to 60,000 miles, but always refer to the owner's manual for specific maintenance intervals.
Possible causes for overheating include low coolant levels, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. It's important to address these issues promptly to avoid engine damage.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the retaining clips, disconnect the electrical connector, and replace the old bulb with a new one. Reassemble in reverse order.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery, then to the donor battery. Connect the negative cable to the donor battery's negative terminal, and attach the other end to a grounded metal part of the dead vehicle. Start the donor vehicle, then the XLR.
Regularly clean the convertible top with a mild soap and water solution, ensure the drainage channels are clear, lubricate the moving parts, and avoid operating the top in extreme temperatures to maintain its condition.