Cadillac SRX 2008 Owner's Manual
![Cadillac SRX 2008 manual cover](/images/XGxpsGWxVwpcWmCIwCmuFHiE/thumbs/thumb175x175.webp)
The 2008 Cadillac SRX typically requires 5W-30 synthetic oil. It's important to check the owner's manual for any specific requirements or recommendations.
To reset the oil life monitor, turn the ignition to ON without starting the engine. Press the INFO button until the Oil Life message appears. Then, press and hold the RESET button until the Oil Life resets to 100%.
The recommended tire pressure for the 2008 Cadillac SRX is generally 30-35 psi. Refer to the sticker on the driver's side door jamb for the exact pressure.
To pair your phone, enable Bluetooth on your device. Press the PHONE button on the SRX control panel, and then follow the prompts to add a new device. Enter the passkey shown on the SRX display into your phone to complete the pairing.
The 2008 Cadillac SRX has a towing capacity of up to 2,500 pounds when properly equipped. Always consult the owner's manual for any specific towing guidelines.
To replace the air filter, open the hood and locate the air filter housing. Unclip the housing, remove the old filter, and insert the new filter. Make sure the filter is seated correctly before re-securing the housing.
Engine overheating could be due to a low coolant level, a malfunctioning thermostat, or a faulty radiator fan. Check the coolant level and inspect for any leaks. If the issue persists, consult a professional mechanic.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintaining correct tire pressure, and replacing air filters. Drive at steady speeds and avoid excessive idling.
To program a new key fob, insert the existing key into the ignition and turn it to ON. Turn it off and remove the key. Within five seconds, insert the new key and turn it to ON. The new key should now be programmed.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light remains on, use an OBD-II scanner to retrieve error codes and consult a mechanic for further diagnosis.