Cadillac Escalade EXT 2012 Owner's Manual

To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Fully depress the accelerator pedal three times within five seconds. The oil change light should flash and then turn off, indicating it has been reset.
The recommended tire pressure for the 2012 Cadillac Escalade EXT is typically 35 PSI for the front and rear tires. Always check the owner’s manual or the tire information placard located on the driver's side door jamb for the most accurate specifications.
To pair your smartphone, ensure Bluetooth is enabled on your phone. On the Escalade's infotainment system, navigate to the Bluetooth settings and select "Pair Device." Follow the on-screen prompts and enter the passcode if required. Once paired, your phone should connect automatically in the future.
The recommended engine oil for the 2012 Cadillac Escalade EXT is SAE 5W-30. Ensure it meets the GM standard GM6094M for optimal performance. Synthetic oil is also recommended for better protection under extreme conditions.
To replace the cabin air filter, locate the filter housing under the passenger side dashboard. Remove the screws or clips holding the cover, take out the old filter, and insert the new one. Ensure the airflow direction arrows on the filter match the arrows on the housing. Reattach the cover securely.
Common causes of battery drain include leaving lights on, faulty alternator, parasitic draw from electronic devices, and degraded battery condition. To troubleshoot, check for any lights or electronics left on and test the battery and alternator for proper operation.
To improve fuel efficiency, maintain proper tire pressure, reduce excess weight, perform regular maintenance, and drive smoothly. Avoid rapid acceleration and excessive idling. Using cruise control on highways can also help maintain a steady speed, improving fuel economy.
The towing capacity of the 2012 Cadillac Escalade EXT is up to 7,600 pounds when properly equipped. Make sure to check the owner’s manual for specific towing guidelines and ensure your vehicle is adequately equipped for towing.
To replace a broken side mirror, remove the interior door panel to access the mirror mounting bolts. Disconnect the wiring harness, remove the bolts, and take out the old mirror. Install the new mirror by reversing the steps, ensuring the mirror is securely attached and connected.
A rough idle can be caused by dirty fuel injectors, a faulty ignition coil, or vacuum leaks. Start by checking and cleaning the fuel injectors, inspecting spark plugs and ignition coils, and examining vacuum hoses for leaks. If the issue persists, consult a professional mechanic for further diagnosis.