Cadillac Escalade EXT 2010 Owner's Manual
![Cadillac Escalade EXT 2010 manual cover](/images/aHKneHXrOKNmBVfACrRqzzFX/thumbs/thumb175x175.webp)
The recommended oil type for the Cadillac Escalade EXT 2010 is SAE 5W-30. Using the correct oil type ensures optimal engine performance and longevity.
To reset the TPMS on a 2010 Cadillac Escalade EXT, turn the ignition to the ON position, press and hold the TPMS reset button until the TPMS indicator light blinks twice, then release the button. Drive the vehicle for a few minutes to complete the reset process.
The towing capacity of the 2010 Cadillac Escalade EXT is 7,600 pounds when properly equipped. It's important to ensure the right hitch and towing accessories are used to safely tow within this limit.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, avoid excessive idling, and drive at moderate speeds.
The 'Check Engine' light can be triggered by various issues such as a loose gas cap, faulty oxygen sensor, or catalytic converter problems. It's advisable to use an OBD-II scanner to read the error code for a more precise diagnosis.
Brake pads should generally be replaced every 30,000 to 70,000 miles depending on driving conditions and habits. Regular inspections during maintenance can help determine the right time for replacements.
The 2010 Cadillac Escalade EXT requires Dexron VI automatic transmission fluid. Using the correct transmission fluid is crucial for optimal transmission performance and longevity.
To change the headlight bulb, first disconnect the battery, then remove the headlight assembly by unscrewing the retaining bolts. Access the bulb housing, remove the old bulb, and replace it with a new one. Reassemble in reverse order.
The recommended tire pressure for the 2010 Cadillac Escalade EXT is typically 35 PSI for both front and rear tires. Always refer to the placard located on the driver's side door jamb for the most accurate information.
To pair your phone, enable Bluetooth on your phone, select 'Phone' on the vehicle's audio system, choose 'Pair Device', and follow the prompts to complete the pairing process. Enter the passkey if prompted.