Cadillac Escalade ESV 2010 Owner's Manual
![Cadillac Escalade ESV 2010 manual cover](/images/POWaxiCVcuRIneThcRWzdxCS/thumbs/thumb175x175.webp)
The recommended oil type for the 2010 Cadillac Escalade ESV is SAE 5W-30. This oil provides the best performance in terms of fuel efficiency and engine protection under most conditions.
To reset the oil life monitor, turn the ignition to ON without starting the engine. Press the gas pedal three times within five seconds. The oil life should reset to 100%.
If the engine overheats, pull over safely and turn off the engine. Allow the engine to cool before checking the coolant level. Refill if necessary, and check for leaks or a malfunctioning thermostat.
To pair your phone, enable Bluetooth on your phone and access the vehicle's infotainment system. Navigate to the Bluetooth settings, select "Add New Device," and follow the prompts to complete the pairing process.
The 2010 Cadillac Escalade ESV has a towing capacity of up to 7,800 pounds when properly equipped with the towing package.
The air filter should be checked every 15,000 miles and replaced if necessary. Under normal driving conditions, it's typically replaced every 30,000 miles.
Common causes include a faulty wheel speed sensor, issues with the steering angle sensor, or problems with the StabiliTrak control module. A diagnostic scan is recommended to pinpoint the exact issue.
To replace a headlight bulb, open the hood and remove the headlight assembly mounting bolts. Carefully pull out the assembly, disconnect the electrical connector, and replace the bulb. Reassemble in reverse order.
The 2010 Cadillac Escalade ESV uses DEXRON-VI automatic transmission fluid. It's important to use the specified fluid to ensure optimal transmission performance and longevity.
Check if the rear A/C controls are correctly set. Ensure that the rear A/C is not in the 'OFF' position. Inspect the fuses related to the rear climate control system, and consider checking the rear blower motor or actuator if problems persist.