Cadillac CTS 2013 Owner's Manual
![Cadillac CTS 2013 manual cover](/images/MVgMBcIgcAoJVYErOxFoxorr/thumbs/thumb175x175.webp)
To reset the oil life indicator, turn the ignition to the "ON/RUN" position without starting the engine. Use the DIC controls on the steering wheel to navigate to "Oil Life" and hold the "SET/CLR" button until you see "Acknowledged" appear on the display.
The recommended tire pressure for the 2013 Cadillac CTS is 30 psi for both front and rear tires. Always refer to the placard on the driver's side door jamb for the most accurate information.
To pair your phone, go to the "Phone" menu on the infotainment system, select "Pair Device," and then activate Bluetooth on your phone. Select "Cadillac CTS" from the list of available devices on your phone and confirm the pairing code when prompted.
The 2013 Cadillac CTS typically requires SAE 5W-30 engine oil. For optimal performance, use oil that meets GM Standard GM6094M. Always check the owner's manual for specific recommendations.
To replace the cabin air filter, open the glove box and remove the limiting arm. Lower the glove box fully, then locate and remove the filter cover behind it. Replace the old filter with a new one, ensuring the airflow arrows match the direction indicated.
If the check engine light comes on, first ensure the gas cap is securely tightened. If the light remains on, use an OBD-II scanner to check for diagnostic trouble codes (DTCs) and address any issues accordingly. Consulting with a professional mechanic is recommended for unresolved issues.
To adjust the headlights, park the vehicle on a level surface facing a wall approximately 25 feet away. Open the hood and locate the headlight adjustment screws. Adjust the screws to align the headlight beams to the desired height and direction.
The towing capacity of the 2013 Cadillac CTS is up to 1,000 pounds when properly equipped. It's important to consult the owner's manual and ensure the vehicle is equipped with the necessary towing accessories.
To improve fuel efficiency, maintain proper tire pressure, use the recommended grade of motor oil, reduce excessive idling, and ensure regular maintenance such as air filter replacements and timely oil changes.
To program a new key fob, insert the working key into the ignition and turn it to the "ON/RUN" position. Remove the key and insert the new key within 10 seconds. Turn the key to the "ON/RUN" position, and wait for the security light to go out. Repeat if necessary.