Cadillac ATS-V 2015 Owner's Manual
![Cadillac ATS-V 2015 manual cover](/images/UoleCYDVMDrEjQtniWmDsCIC/thumbs/thumb175x175.webp)
The recommended maintenance intervals for the Cadillac ATS-V 2015 include oil changes every 7,500 miles, tire rotations every 7,500 miles, and a comprehensive inspection every 15,000 miles. Refer to the owner's manual for a detailed schedule.
To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Use the steering wheel controls to navigate to the "Oil Life Remaining" screen and press the "SET/CLR" button until the display shows 100%.
The Cadillac ATS-V 2015 requires Dexos1 5W-30 synthetic oil for optimal performance and engine protection.
If the Cadillac ATS-V 2015 won't start, check the battery connections for corrosion, ensure the fuel level is adequate, and verify that the key fob battery is not dead. If the problem persists, consult a professional mechanic.
If the check engine light illuminates, check for loose gas cap first. If the light remains on, use an OBD-II scanner to read the error codes or visit a certified technician for diagnosis and repair.
To improve fuel efficiency, regularly maintain your vehicle with timely oil changes, keep tires properly inflated, reduce excess weight, and drive conservatively by avoiding rapid acceleration and braking.
The recommended tire pressure for the 2015 Cadillac ATS-V is 35 psi for both the front and rear tires. Always refer to the tire information label located on the driver’s side door jamb for confirmation.
To pair your smartphone, enable Bluetooth on your phone and use the infotainment system to navigate to "Phone Settings" > "Pair Device." Select your phone from the list and confirm the pairing code.
Common issues include electrical system problems and engine misfires. Regular maintenance and timely repairs by certified technicians can mitigate these issues. Ensure software updates are applied and components are checked regularly.
To replace the air filter, open the hood and locate the air filter housing. Remove the clips or screws securing the cover, take out the old filter, and insert a new one. Ensure the filter is seated correctly and replace the cover securely.