BT 3580 User Guide
![BT 3580 Phone manual cover](/images/pNaKxETHwQAIFfKpTYtpPiIi/thumbs/thumb175x175.webp)
To set up your BT 3580 for the first time, connect the base unit to your phone line using the supplied cable, then plug it into a power outlet. Insert the batteries into the handset and place it on the base to charge for at least 16 hours before first use.
To register an additional handset, first ensure it is the same model. On the base, press and hold the 'Find' button for about 5 seconds. On the handset, go to the menu, select 'Settings', then 'Registration', and follow the on-screen instructions to complete the process.
If there is no dial tone, check that all cables are securely connected. Ensure the phone line is working by testing another phone on the same socket. If the problem persists, try resetting the phone by unplugging it for a few minutes and then reconnecting it.
To access voicemail, press the '1' key on your handset and hold it until it dials the voicemail number. Follow the voice prompts to listen to your messages. Make sure you have set up your voicemail service with your provider beforehand.
To block unwanted calls, press the 'Menu' button, select 'Call Control', then 'Block Calls'. You can add specific numbers to your block list or set it to block anonymous calls.
To reset the BT 3580 to factory settings, go to the 'Menu', select 'Settings', then 'Reset', and confirm your selection. This will erase all personal settings and restore the phone to its original state.
To change the ringer volume, press the 'Menu' button, navigate to 'Settings', then 'Ringtones'. Use the arrow keys to adjust the volume to your preference and press 'OK' to save.
If your phone is not charging, ensure that the handset is correctly placed on the base unit and that the charging contacts are clean. Also, check if the power adapter is properly connected. If issues persist, consider replacing the rechargeable batteries.
To transfer a call, press the 'Intercom' button during a call, select the handset you wish to transfer to, and press 'OK'. Once the other handset answers, you can complete the transfer by ending the call on your handset.
Yes, the BT 3580 can be used with a compatible DECT headset. Follow the headset's instructions to pair it with the phone, usually involving setting the phone to 'Pairing mode' and following the pairing process on the headset.