Briggs & Stratton 42532x50A Parts Manual
![Briggs & Stratton 42532x50A Tractor manual cover](/images/OjCVrjWPHeWSsKyYMrxNpOqC/thumbs/thumb175x175.webp)
Ensure the tractor is on a flat surface, engage the parking brake, set the throttle to the 'Fast' position, and then turn the ignition key to start the engine.
Check the fuel level, ensure the battery is charged, verify that the spark plug is clean and properly connected, and ensure the fuel valve is open.
Change the oil every 50 hours of operation or at the beginning of each season, whichever comes first.
Use SAE 30 oil for temperatures above 40°F (4°C) and 10W-30 for varying temperature ranges.
Ensure the mower deck is level, check the blades for sharpness and balance, and adjust the tire pressure to the recommended levels.
Inspect the battery terminals for corrosion, ensure the alternator is functioning, and check the wiring connections for any damage or looseness.
Remove the air filter cover, take out the filter, and if it's a foam filter, wash it with warm soapy water, rinse, and allow it to dry. If it's paper, gently tap it to remove debris.
Use the throttle control lever to adjust the engine speed, ensuring it is set to the 'Fast' position for mowing and 'Slow' for idling.
Refer to the tractor's manual for the recommended tire pressure, but generally, it should be around 10 PSI for the front tires and 12 PSI for the rear tires.
Clean the tractor, change the oil, stabilize the fuel, disconnect the battery, and store it in a dry, sheltered area. Cover the tractor to protect it from dust and moisture.