Briggs & Stratton 38501x50B Parts Manual
![Briggs & Stratton 38501x50B Tractor manual cover](/images/fWocbVHPDnfkAIYvCZKBgGDh/thumbs/thumb175x175.webp)
To start the Briggs & Stratton 38501x50B Tractor, ensure the parking brake is engaged, the transmission is in neutral, and the throttle is set to the choke position. Then, turn the ignition key to the start position until the engine fires.
Use SAE 30 oil for temperatures above 40°F (4°C) and 10W-30 for temperatures below 40°F (4°C). Always check the manual for specific recommendations.
Change the oil after the first 5 hours of use, and then every 50 hours or annually, whichever comes first.
Check the fuel level, ensure the spark plug is connected, verify that the battery is charged, and inspect the air filter for blockages.
Regularly clean the underside of the mower deck to prevent grass build-up, check and sharpen blades as needed, and ensure all bolts are tight.
The recommended tire pressure is typically around 10-14 psi for the front tires and 8-12 psi for the rear tires. Always refer to the manual for exact specifications.
Check for levelness of the mower deck, ensure blades are sharp and balanced, and verify that tire pressures are equal.
Inspect the battery terminals for corrosion, ensure the alternator is functioning, and confirm that there are no electrical shorts. Consider replacing the battery if it is old.
Clean the tractor, remove the battery, add a fuel stabilizer to the gas tank, and store it in a dry, sheltered location. Cover the tractor to protect it from dust and moisture.
Inspect the blades for damage and balance, check for loose bolts and nuts, and ensure that the engine is securely mounted.