Bose Companion 2 Series II Multimedia Quick Setup Guide
![Bose Companion 2 Series II Multimedia Speaker manual cover](/images/LCAvvSqjBhiAcFIzCcQmpaBE/thumbs/thumb175x175.webp)
To set up your Bose Companion 2 Series II speakers, connect the audio input cable from the right speaker to your computer's audio output jack. Then, connect the power supply to the right speaker and plug it into an electrical outlet. Finally, connect the left speaker to the right speaker using the included cable.
First, ensure that the speakers are properly connected to the power supply and the audio source. Check the volume levels on both the speakers and the audio source. If there is still no sound, try connecting the speakers to a different device to rule out issues with the audio source.
To clean your speakers, use a soft, dry cloth to wipe the exterior surfaces. Do not use any cleaning sprays or liquids, as they may damage the speakers. Make sure the speakers are unplugged before cleaning.
A buzzing noise may be caused by a loose connection or interference from other electronic devices. Check all connections to ensure they are secure. If the issue persists, try moving the speakers away from other electronic devices or using a different outlet.
Yes, you can connect these speakers to a TV using the auxiliary input on the right speaker. Use an audio cable to connect the TV's audio output to the speaker's input. Ensure the TV's audio settings are configured to output sound through external speakers.
For optimal sound, place the speakers at an equal distance from each other and at ear level. The speakers should be angled slightly towards the listener. Avoid placing them directly against walls to prevent sound distortion.
Distorted sound may result from high volume levels or a poor connection. Lower the volume on both the speakers and the audio source. Ensure that all cables are securely connected and not damaged. Test the speakers with a different audio source to determine if the issue persists.
Yes, these speakers can be connected to gaming consoles via the audio output. Use the appropriate cable to connect the console's audio output to the auxiliary input on the right speaker. Consult the console's manual for more specific connection instructions.
The Bose Companion 2 Series II speakers do not have a factory reset option. However, you can disconnect the power and audio cables for a few minutes to reset the connection.
The dimensions of each Bose Companion 2 Series II speaker are approximately 7.5 inches in height, 3.1 inches in width, and 5.9 inches in depth.