Contents

Sicherheitshinweise
Vor dem Einbau
Vorbereitung des Kchenmbels (Abb. 1-2)
- Zwischenboden
Einbau des Gerts (Abb. 3)
- Hinweis
  - 1. Schrauben Sie die Klammern in der angegebenen Position an, so dass sie sich frei drehen.
  - 2. Fgen Sie das Kochfeld mittig ein.
  - 3. Drehen Sie die Klammern und ziehen Sie diese fest an.
Ausbau des Kochfeldes
Gasanschluss (Abb. 4)
- : Gasaustrittsgefahr!
Elektrischer Anschluss (Abb. 5)
Umstellung auf eine andere Gasart
- A) Austausch der Dsen (Abb. 6):
  - 1. Nehmen Sie die Roste, Brennerdeckel und Verteiler ab.
  - 2. Tauschen Sie die Dsen mit dem ber unseren Kundendienst erhltlichen Schlssel mit der Artikelnummer 340847 aus (fr Doppelbrenner und Dreiflammenbrenner Artikelnummer 340808), siehe Tabelle I. Achten Sie dabei besonders darauf, dass die D...
  - 3. Bringen Sie die Verteiler und Brennerdeckel auf den entsprechenden Kochstellen an. Setzen Sie auerdem die Roste korrekt ein.
- B) Einstellung der Gashhne (Abb. 7):
  - 1. Drehen Sie die Bedienknebel auf die niedrigste Stufe.
  - 2. Ziehen Sie die Bedienknebel der Gashhne ab. Es wird eine Knebeldichtung aus flexiblem Gummi sichtbar. Drcken Sie diese mit der Schraubendreherspitze beiseite, um an die Einstellschraube des Gashahns zu gelangen.
  - 3. Stellen Sie die minimale Gaszufuhr ein, indem Sie die Bypass- Schraube mit einem Schlitzschraubenzieher drehen.
  - 1. Nehmen Sie alle Roste, Brennerdeckel, Verteiler und Bedienknebel ab.
  - 2. Lockern Sie die Brenner-Schrauben.
  - 3. Verwenden Sie ggf. den bei unserem Kundendienst erhltlichen Demontagehebel 483196. Lsen Sie die vordere Clip-Befestigung, indem Sie den Hebel in den markierten Bereichen ansetzen. Abb. 8.
  - 4. Fr den Wiedereinbau des Gerts folgen Sie den Ausbauanweisungen in umgekehrter Reihenfolge.
(. 1-2)
(. 3)
- - 1. .
  - 2. .
  - 3. .
(. 4)
- : !
(. 5)
- A) (. 6):
  - 1. , .
  - 2. 340847 ( ...
  - 3. . .
- B) (. 7):
  - 1. .
  - 2. . . ...
  - 3. bypass .
  - 1. , , .
  - 2. .
  - 3. , 483196 . , ...
  - 4. .
Safety precautions
Before installing
Preparation of the kitchen unit (fig. 1-2)
- Intermediate floor
Installation of appliance (fig. 3)
- Note
  - 1. Screw each one of the clips into the position indicated so that they are free to rotate.
  - 2. Insert and centre the hob.
  - 3. Turn the clips and tighten them fully.
Removal of hob
Gas connection (fig. 4)
- : Danger of leaks!
Electric connection (fig. 5)
Changing the gas type
- A) Changing the nozzles (fig. 6):
  - 1. Remove the pan supports, burner caps and diffusers.
  - 2. Change the nozzles using the spanner code 340847 (code 340808 for double-flame burners or triple-flame burners) provided by our Technical Assistance Service, see table I, taking special care to ensure that the nozzle does not fall when it is remov...
  - 3. Position the diffusers and burner caps on the corresponding rings. The pan supports must also be positioned correctly.
- B) Adjusting the taps (Fig. 7):
  - 1. Set the control knobs to minimum.
  - 2. Remove the control knobs from the taps. It has a flexible rubber valve reinforcing ring. Press with the tip of the screwdriver to access the tap's adjusting screw.
  - 3. Adjust the minimum ring setting by turning the by-pass screw using a flat head screwdriver.
  - 1. Remove all pan supports, burner caps, diffusers and control knobs.
  - 2. Remove the screws from the burners.
  - 3. If necessary, use the disassembly lever 483196 availablle from our Technical Assistance Service. To release the front clips, apply the lever to the area shown in figure 8.
  - 4. To reinstall the appliance, proceed in the reverse order to disassembly.
Indicaciones de seguridad
Antes de la instalacin
Preparacin del mueble (fig. 1-2)
- Separador
Instalacin del aparato (fig. 3)
- Nota
  - 1. Atornille cada una de las grapas en la posicin indicada dejando que giren libremente.
  - 2. Encastre y centre la placa de coccin.
  - 3. Gire las grapas y apritelas a fondo.
Desmontaje de la placa de coccin
Conexin de gas (fig. 4)
- : Peligro de fuga!
Conexin elctrica (fig. 5)
Cambio del tipo de gas
- A) Cambio de inyectores (fig. 6):
  - 1. Retire las parrillas, tapas de quemador y difusores.
  - 2. Cambie los inyectores usando la llave disponible a travs de nuestro servicio tcnico con cdigo 340847 (para quemadores de doble o triple llama cdigo 340808), ver tabla I, teniendo especial cuidado en que no se desprenda el inyector al retir...
  - 3. Coloque los difusores y las tapas de los quemadores en sus correspondientes fuegos. Adems deber colocar adecuadamente las parrillas.
- B) Reglaje de los grifos (fig. 7):
  - 1. Coloque los mandos en la posicin de mnimo.
  - 2. Retire los mandos de los grifos. Se encontrar con un retn de goma flexible. Presione con la punta del destornillador para acceder al tornillo de regulacin del grifo.
  - 3. Regule el fuego mnimo girando el tornillo bypass mediante un destornillador de punta plana.
  - 1. Quite todas las parrillas, tapas de los quemadores, difusores y mandos.
  - 2. Suelte los tornillos de los quemadores.
  - 3. Si es necesario, utilice la palanca de desmontaje 483196 disponible a travs de nuestro servicio tcnico. Libere el clipaje delantero aplicando la palanca en las zonas sealadas. Fig. 8.
  - 4. Para volver a montar el aparato proceda de modo inverso al desmontaje.
Indications de scurit
Avant l'installation
Prparation du meuble (fig.1-2)
- Plancher intermdiaire
Installation de l'appareil (fig. 3)
- Remarque
  - 1. Vissez chacune des agrafes dans la position indique en les laissant tourner librement.
  - 2. Encastrez et centrez la plaque de cuisson.
  - 3. Tournez les agrafes et serrez-les fond.
Dmontage de la plaque de cuisson
Branchement de gaz (fig. 4)
- : Risque de fuites !
Branchement lectrique (fig. 5)
Changement du type de gaz
- A) Changement des injecteurs (fig. 6):
  - 1. Retirez les grilles, les couvercles de brleur et les diffuseurs.
  - 2. Changez les injecteurs en utilisant la cl disponible (rf. 340847) auprs de notre Service technique (pour brleurs double ou triple flamme, rf. 340808), cf. tableau I, en faisant particulirement attention ne pas dloger l'injecteur e...
  - 3. Placez les diffuseurs et les couvercles des brleurs sur leurs feux correspondants. Il faudra galement placer adquatement les grilles.
- B) Rglage des robinets (Fig. 7)
  - 1. Placez les boutons de commande sur la position minimum.
  - 2. Retirez les commandes des robinets. Vous trouverez alors une bague en caoutchouc flexible. Appuyez avec la pointe du tournevis afin d'accder la vis de rglage du robinet.
  - 3. Rglez le feu minimum en tournant la vis by-pass l'aide d'un tournevis pointe plate.
  - 1. tez tous les grilles, couvercles des brleurs, diffuseurs et boutons de commande.
  - 2. Desserrez les vis des brleurs.
  - 3. Si ncessaire, utilisez le levier de dmontage 483196 disponible chez notre service technique. Librez l'ensemble de clips avant en appliquant le levier sur les zones indiques. Fig. 8.
  - 4. Pour remonter l'appareil, suivez la procdure inverse au dmontage.
Biztonsgi elrsok
zembe helyezs eltt
A btor elksztse (1-2. bra)
- Elvlasztlap
A kszlk zembe helyezs (3. bra)
- Utasts
  - 1. Csavarozza a pntokat a jellt helyzetbe gy, hogy lazn forogjanak.
  - 2. Helyezze el s igaztsa be a fzlapot.
  - 3. Hzza meg a pntokat, s jl szortsa be ket.
A fzlap kiszerelse
Gzcsatlakoztats (4. bra)
- : ramts veszlye!
Elektromos csatlakoztats (5. bra)
A gz tpusnak megvltoztatsa
- A) Fvkk cserje (6. bra):
  - 1. Emelje le a rostlyokat, az gk fedelt, valamint az gfejeket.
  - 2. Cserlje ki a fvkkat a vevszolglatunkon beszerezhet kulcs (kdszm: 340847; kt- s hromsoros gk esetn: 340808) segtsgvel (lsd I. tblzat), kln figyelmet fordtva arra, hogy az gfejrl val eltvol...
  - 3. Helyezze a fvkkat s az gk fedelt a megfelel helyre. A rostlyokat is helyezze el megfelelen.
- B) Gzcsapok belltsa (7. bra)
  - 1. lltsa a kapcsolkat minimum llsba.
  - 2. Hzza le a csapok kapcsolit. Itt egy hajlkony gumi tmtst tall. Egy csavarhz vgvel hozzfrhet a csapot szablyoz csavarhoz.
  - 3. lltsa be a legkisebb fokozatot gy, hogy egy lapos csavarhz segtsgvel elforgatja a by-pass csavart:
  - 1. Vegye le az gk fedeleit, a rostlyokat s a kapcsolkat.
  - 2. Oldja meg az gk csavarjait.
  - 3. Szksg esetn hasznlja az emelt (483196), melyet vevszolglatunk segtsgvel szerezhet be. Pattintsa ki az ells kapcsot, ehhez hasznlja az emelt a megjellt helyeken. 8. bra.
  - 4. A zsrfog tlca visszaszerelshez vgezze el a leszerels mveleteit fordtott sorrendben.
Indicazioni di sicurezza
Prima dell'installazione
Preparazione del mobile (fig. 1-2)
- Ripiano intermedio
Installazione dell'apparecchio (fig. 3)
- Avvertenza
  - 1. Avvitare ognuna delle graffe nella posizione indicata, lasciandole girare liberamente.
  - 2. Incassare e centrare il piano di cottura.
  - 3. Girare le graffe e stringerle a fondo.
Smontaggio del piano di cottura
Attacco del gas (fig. 4)
- : Pericolo di fughe!
Connessione elettrica (fig. 5)
Cambio del tipo di gas
- A) Sostituzione degli iniettori (fig. 6):
  - 1. Rimuovere le griglie, i coperchi del bruciatore e i diffusori.
  - 2. Sostituire gli iniettori usando la chiave disponibile presso il nostro Servizio Tecnico, codice 340847 (340808 per i bruciatori a doppia o tripla fiamma); far riferimento alla tabella I, facendo particolare attenzione che l'iniettore non si distac...
  - 3. Collocare i diffusori e i coperchi dei bruciatori sui corrispondenti fuochi. Sistemare correttamente le griglie.
- B) Regolazione dei rubinetti (Fig. 7)
  - 1. Collocare le manopole nella posizione di minimo.
  - 2. Estrarre le manopole dei rubinetti. Si trover una tenuta in gomma flessibile. Esercitare pressione con la punta del cacciavite per accedere alla vite di regolazione del rubinetto.
  - 3. Regolare il fuoco minimo girando la vite di by-pass con un cacciavite a punta piatta.
  - 1. Togliere tutte le griglie, i coperchi dei bruciatori, i diffusori e le manopole.
  - 2. Rimuovere le viti dei bruciatori.
  - 3. Se necessario, utilizzare la leva di smontaggio 483196 disponibile presso il nostro servizio tecnico. Rilasciare il fissaggio a clip anteriore facendo leva nelle zone indicate. Fig. 8
  - 4. Per rimontare l'apparecchio, invertire la procedura di smontaggio.
Veiligheidsaanwijzingen
Vr de installatie
Voorbereiding van het meubel (afb. 1-2)
- Tussenschot
Installatie van het apparaat (afb. 3)
- Aanwijzing
  - 1. Draai elk van de klemmen in de aangeduide stand en zorg dat deze vrij draaien.
  - 2. Bouw de kookplaat in en centreer deze.
  - 3. Draai de klemmen helemaal aan.
Uitbouw van de kookplaat
Gasaansluiting (fig. 4)
- : Lekgevaar!
Elektrische aansluiting (fig. 5)
Verandering van gastype
- A) Vervangen van de inspuiters (afb. 6):
  - 1. Verwijder de roosters, hoedjes en verspreiders.
  - 2. Vervang de inspuiters met de sleutel die beschikbaar is via onze technische dienst, met code 340847 (voor branders met dubbele of driedubbele vlam code 340808), zie tabel I. Zorg dat de inspuiter niet losraakt bij het verwijderen of bevestigen hie...
  - 3. Plaats de verspreiders en de hoedjes op de overeenstemmende pitten. De roosters moeten bovendien naar behoren geplaatst worden.
- B) Afstelling van de kranen (Afb. 7)
  - 1. Zet de knoppen in de laagste stand.
  - 2. Haal de bedieningsknoppen van de kranen af. U treft een flexibele rubberen keerring aan. Voer met de punt van de schroevendraaier druk uit om bij de stelschroef van de kraan te komen.
  - 3. Stel de minimumstand af door de bypass bout te draaien met een schroevendraaier met een vlakke punt.
  - 1. Verwijder alle roosters, hoedjes, verspreiders en knoppen.
  - 2. Maak de bouten van de branders los.
  - 3. Gebruik indien vereist de uitbouwhendel 483196, beschikbaar bij onze technische dienst. Maak de voorste clips los door deze in de aangeduide zones omhoog te wippen. Afb. 8.
  - 4. Ga, om het apparaat terug in te bouwen, op omgekeerde wijze te werk dan bij de demontage.
Wskazwki dotyczce bezpieczestwa
Przed zainstalowaniem
Przygotowanie mebla (rys. 1-2)
- Pyta przegradzajca
Instalacja urzdzenia (rys. 3)
- Wskazwka
  - 1. Przykrci kady z uchwytw we wskazanej pozycji, tak by obracay si swobodnie.
  - 2. Wsun pyt kuchenki i ustawi centralnie w wyciciu mebla.
  - 3. Obrci uchwyty i docisn je do koca.
Demonta pyty kuchenki
Podczanie gazu (rys. 4)
- : Niebezpieczestwo ulatniania si gazu!
Podczanie prdu (rys. 5)
Zmiana rodzaju gazu
- A) Wymiana dyszy (Rys. 6):
  - 1. Zdj ruszty, nakadki palnika i dyfuzory.
  - 2. Wymieni dysze za pomoc klucza dostpnego w naszym Serwisie Technicznym (kod produktu 340847, natomiast w przypadku palnikw o podwjnym lub potrjnym wiecu pomieni - kod produktu 340808), patrz tabela I, zwracajc szczegln uwag ...
  - 3. Zaoy dyfuzory i nakadki palnikw na odpowiednich palnikach. Ponadto naley prawidowo zaoy ruszty.
- B) Regulacja kurkw gazu (Rys. 7)
  - 1. Ustawi wszystkie pokrta w pooeniu minimalnym.
  - 2. Wyj pokrta z kurkw. Pod spodem znajduje si element zabezpieczajcy z elastycznej gumy. Nacisn element kocem rubokrtu, aby dosta si do ruby regulacyjnej kurka.
  - 3. Wyregulowa pomie minimalny, obracajc rub zczki przejciowej za pomoc rubokrtu z pask kocwk.
  - 1. Zdj wszystkie ruszty, nakadki z palnikw, dyfuzory oraz wyj pokrta.
  - 2. Wykrci ruby z palnikw.
  - 3. Naley skorzysta z dwigni demontujcej (kod produktu 483196) dostpnej w naszym Serwisie Technicznym. Zwolni przednie zaciski, uywajc dwigni w zaznaczonych miejscach. Rys. 8.
  - 4. W celu ponownego zamontowania formy na tuszcz, naley wykona czynnoci demontau w odwrotnej kolejnoci:
Indicaes de segurana
Antes da instalao
Preparao do mvel (fig. 1-2)
- Fundo intermdio
Instalao do aparelho (fig. 3)
- Nota
  - 1. Aparafuse cada um dos grampos na posio indicada, deixando que estes rodem livremente.
  - 2. Encastre e centre a placa de cozedura.
  - 3. Gire os grampos e aperte-os bem.
Desmontagem da placa de cozedura
Ligao a gs (fig. 4)
- : Perigo de fuga!
Ligao elctrica (fig. 5)
Mudana do tipo de gs
- A) Substituio dos injectores (fig. 6):
  - 1. Retire as grelhas, as tampas de queimador e os difusores.
  - 2. Substitua os injectores usando a chave disponibilizada pelo nosso servio de assistncia tcnica, com o cdigo 340847 (para queimadores de chama dupla ou tripla, cdigo 340808) (ver tabela I), tendo especial ateno para que o injector no...
  - 3. Coloque os difusores e as tampas dos queimadores nos respectivos lugares. Alm disso, deve colocar adequadamente as grelhas.
- B) Regulao das torneiras (Fig. 7)
  - 1. Coloque os comandos na sua posio mnima.
  - 2. Retire os comandos das torneiras. Ficar visvel um retentor de borracha flexvel. Pressione com a ponta de uma chave de fendas, para aceder ao parafuso de regulao da torneira.
  - 3. Regule a chama mnima rodando o parafuso bypass atravs de uma chave de fendas de ponta plana.
  - 1. Remova todas as grelhas, tampas dos queimadores, difusores e comandos.
  - 2. Desaperte os parafusos dos queimadores.
  - 3. Se necessrio, utilize a alavanca de desmontagem 483196 disponvel atravs do nosso Servio de Assistncia Tcnica. Retire o clipe dianteiro, colocando a alavanca nas zonas assinaladas. Fig. 8.
  - 4. Para voltar a montar o aparelho, proceda de modo inverso ao da desmontagem
Indicaii referitoare la siguran
nainte de instalare
Pregtirea mobilei (fig.1-2)
- Plac intermediar
Instalarea aparatului (fig. 3)
- Indicaie
  - 1. nurubai fiecare clem n poziia indicat lsnd s se roteasc liber.
  - 2. ncastrai i centrai plita de gtit.
  - 3. Rotii clemele i strngei-le pn la capt.
Demontarea plitei de gtit
Conectare la gaz (fig. 4)
- : Pericol de scurgere!
Conexiune electric (fig. 5)
Schimbarea tipului de gaz
- A) Schimbarea injectoarelor (fig. 6):
  - 1. Scoatei grtarele, capacele arztorului i difuzoarele.
  - 2. Schimbai injectoarele utiliznd cheia disponibil prin intermediul serviciului nostru tehnic, cu codul 340847 (pentru arztoarele cu flacr dubl sau tripl cod 340808), consultai tabelul I, avnd deosebit grij s nu se deprind...
  - 3. Poziionai difuzoarele i capacele arztoarelor n locaurile corespunztoare. n plus, va trebui s poziionai n mod corect i grtarele.
- B) Reglarea robinetelor (Fig. 7)
  - 1. Fixai comenzile n poziia de minim.
  - 2. Scoatei comenzile robinetelor. Vei gsi o garnitur din cauciuc flexibil. Apsai cu vrful urubelniei pentru a ajunge la urubul de reglare al robinetului.
  - 3. Reglai focul la minim rotind urubul bypass cu ajutorul unei urubelnie cu vrf plat.
  - 1. Scoatei toate grtarele, capacele arztoarelor, difuzoarele i comenzile.
  - 2. Eliberai uruburile arztoarelor.
  - 3. Dac este necesar, utilizai prghia de demontare 483196 disponibil prin intermediul serviciului nostru tehnic. Eliberai clema din fa aplicnd prghia n zonele semnalate. Fig. 8.
  - 4. Pentru a remonta aparatul, procedai n sens invers demontrii.
(. 1-2)
(. 3)
- - 1. , .
  - 2. .
  - 3. .
(. 4)
- : !
(. 5)
- A) (. 6):
  - 1. , .
  - 2. , , 340847 ( ...
  - 3. . .
- B) (P. 7)
  - 1. .
  - 2. . . , ...
  - 3. , .
  - 1. , , .
  - 2. .
  - 3. (483196), . ...
  - 4. , .
Gvenlik nerileri
Kurulumdan nce
Mobilyann hazrlanmas (ekil 1-2)
- Ara zemin
Cihazn kurulumu (ekil 3)
- Bilgi
  - 1. Kskalar rahata dnebilmelerini salayarak belirtilen pozisyonda vidalaynz.
  - 2. Yerletiriniz ve piirme tezgahn ortalaynz.
  - 3. Kskalar dndrnz ve skca vidalaynz.
Cihazn sklmesi
Gazl balant (ek. 4)
- : Sznt tehlikesi!
Elektrikli balant (ek. 5)
Gaz tipinin deitirilmesi
- A) Brlr ucunun deitirilmesi (ek. 6):
  - 1. Izgaralar, brlr kapaklarn ve alev datclar karnz.
  - 2. Teknik Servisimizden 340847 kod numaras ile temin edilebilecek olan anahtar kullanarak brlr ularn deitiriniz (ift alevli brlrler iin kod numaras 340808), bkz tablo I, brlre takarken veya karrken brlr ucunu...
  - 3. Alev datclar ve brlr kapaklarn ilgili ksmlarna taknz. Ayrca zgaralarn uygun olarak taklmas gereklidir.
- B) Vanalarn ayarlanmas (ekil 7)
  - 1. Kumanda dmelerini minimum konumuna getiriniz.
  - 2. Vanalarn kumanda dmelerini kartnz. Esnek bir kauuk conta ile birlikte bulunur. Vana ayar vidasna ulamak iin tornavidann ucuyla bastrnz.
  - 3. Dz ulu tornavida ile by-pass vidasn evirerek en dk alevi ayarlaynz.
  - 1. Tm brlr kapaklarn, zgaralar ve kumanda dmelerini sknz.
  - 2. Brlrlerin vidalarn karnz.
  - 3. Gerekliyse, teknik servisimizden 483196 kodu ile tedarik edebileceiniz bir demontaj aleti kullannz. Aleti belirtilen alanlarda uygulayarak n ksmdaki balanty anz. ek. 8.
  - 4. Ya sratma aparatn tekrar takmak iin skme ilemlerinin tersi bir srayla devam ediniz.

Blaupunkt 5G7B3Q50 Installation Instructions

Pages 24

Year 0

Language(s)

of 24

Installation Instructions

24 pages

Instruction Manual

20 pages

Blaupunkt 5G7B3Q50 Specification

The Blaupunkt 5G7B3Q50 Hob is a state-of-the-art kitchen appliance designed for efficiency and user-friendly operation. This model features a sleek, modern design that complements any contemporary kitchen decor, characterized by its durable, easy-to-clean glass-ceramic surface. Equipped with advanced 5G technology, the hob ensures rapid and even heat distribution across its cooking zones, significantly enhancing cooking performance and energy efficiency. The hob includes multiple induction zones, each with precise temperature control to accommodate various cooking needs, from simmering to boiling.

Its intuitive touch control panel allows users to adjust the heat settings effortlessly, while the integrated timer function aids in precise cooking management. For added safety, the hob is equipped with a child lock feature and an automatic shut-off mechanism to prevent overheating. The Blaupunkt 5G7B3Q50 also includes a residual heat indicator to alert users when the surface remains hot after use, reducing the risk of accidental burns.

This appliance supports seamless connectivity with smart home systems, allowing users to monitor and control the hob remotely via a dedicated mobile app. Its energy-efficient design complies with the latest environmental standards, making it an eco-friendly choice for modern households. The Blaupunkt 5G7B3Q50 Hob combines cutting-edge technology with practical features, providing a reliable and versatile solution for everyday cooking tasks.

Blaupunkt 5G7B3Q50 F.A.Q.

How do I turn on the Blaupunkt 5G7B3Q50 hob?

To turn on the Blaupunkt 5G7B3Q50 hob, press and hold the power button until the display lights up. Then, select the desired cooking zone and adjust the heat level using the touch controls.

What should I do if the hob doesn't heat up?

Ensure that the hob is properly connected to the power supply. Check the circuit breaker and make sure it hasn’t tripped. If the problem persists, contact Blaupunkt customer service for assistance.

How can I clean the Blaupunkt 5G7B3Q50 hob?

Allow the hob to cool completely before cleaning. Use a damp cloth with mild detergent to clean the surface. Avoid abrasive cleaners and scouring pads to prevent damage to the glass surface.

Why is the hob making a clicking noise?

A clicking noise is normal and can occur when the hob is expanding or contracting due to temperature changes. If the noise is excessive or continuous, ensure that the hob is installed correctly and not in contact with other surfaces.

How do I lock the controls on the Blaupunkt 5G7B3Q50 hob?

To lock the controls, press and hold the lock button until the lock icon appears on the display. This feature prevents accidental changes to the settings.

What does the error code "E2" mean on my hob?

Error code "E2" indicates an overheating problem. Ensure that the cooking zone is not covered with inappropriate cookware and has proper ventilation. If the error persists, consult the user manual or contact customer support.

Can I use cast iron pans on the Blaupunkt 5G7B3Q50 hob?

Yes, you can use cast iron pans on the Blaupunkt 5G7B3Q50 hob. However, ensure that the bottom of the pan is smooth to prevent scratching the glass surface.

How do I set a timer for cooking on the hob?

Select the cooking zone you wish to set a timer for, then press the timer button. Use the plus and minus buttons to set the desired cooking time. The hob will automatically turn off the selected zone once the timer expires.

What maintenance is required for the Blaupunkt 5G7B3Q50 hob?

Regularly clean the hob to prevent buildup of food residues. Inspect the power cable for any signs of wear or damage. It is also recommended to have a professional check the appliance annually for optimal performance.

How do I reset the Blaupunkt 5G7B3Q50 hob after a power outage?

After a power outage, turn off the hob completely and disconnect it from the power supply for a few minutes. Reconnect the power and turn the hob back on. This should reset the appliance.