Contents

Sicherheitshinweise
Vor dem Einbau
Vorbereitung des Kchenmbels (Abb. 1-2)
- Zwischenboden
Einbau des Gerts (Abb. 3)
- Hinweis
  - 1. Entnehmen Sie die Klammern dem Zubehrbeutel und schrauben Sie sie in der angegebenen Postition an, so dass sie sich frei drehen.
  - 2. Fgen Sie das Kochfeld mittig ein.
  - 3. Drehen Sie die Klammern und ziehen Sie diese fest an.
Ausbau des Kochfeldes
Gasanschluss (Abb. 4)
- : Gasaustrittsgefahr!
Elektrischer Anschluss (Abb. 5)
Umstellung auf eine andere Gasart
- A) Austausch der Dsen (Abb. 6):
  - 1. Nehmen Sie die Roste, Brennerdeckel und Verteiler ab.
  - 2. Tauschen Sie die Dsen mit dem ber unseren Kundendienst erhltlichen Schlssel mit der Artikelnummer 340847 aus (fr Doppelbrenner und Dreiflammenbrenner Artikelnummer 340808), siehe Tabelle I. Achten Sie dabei besonders darauf, dass die D...
  - 3. Bringen Sie die Verteiler und Brennerdeckel auf den entsprechenden Kochstellen an. Setzen Sie auerdem die Roste korrekt ein.
- B) Einstellung der Gashhne (Abb. 7):
  - 1. Drehen Sie die Bedienknebel auf die niedrigste Stufe.
  - 2. Ziehen Sie die Bedienknebel der Gashhne ab. Es wird eine Knebeldichtung aus flexiblem Gummi sichtbar. Drcken Sie diese mit der Schraubendreherspitze beiseite, um an die Einstellschraube des Gashahns zu gelangen.
  - 3. Stellen Sie die minimale Gaszufuhr ein, indem Sie die Bypass- Schraube mit einem Schlitzschraubenzieher drehen.
  - 1. Nehmen Sie alle Roste, Brennerdeckel, Verteiler und Bedienknebel ab.
  - 2. Lockern Sie die Brenner-Schrauben.
  - 3. Fr den Wiedereinbau des Gerts folgen Sie den Ausbauanweisungen in umgekehrter Reihenfolge.
(. 1-2)
(. 3)
- - 1. , ...
  - 2. .
  - 3. .
(. 4)
- : !
(. 5)
- A) (. 6):
  - 1. , .
  - 2. 340847 ( ...
  - 3. . .
- B) (. 7):
  - 1. .
  - 2. . . ...
  - 3. bypass .
  - 1. , , .
  - 2. .
  - 3. .
Safety precautions
Before installing
Preparation of the kitchen unit (fig. 1-2)
- Intermediate floor
Installation of appliance (fig. 3)
- Note
  - 1. Remove the clips from the accessory bag and screw them into the position indicated so that they can turn freely.
  - 2. Insert and centre the hob.
  - 3. Turn the clips and tighten them fully.
Removal of hob
Gas connection (fig. 4)
- : Danger of leaks!
Electric connection (fig. 5)
Changing the gas type
- A) Changing the nozzles (fig. 6):
  - 1. Remove the pan supports, burner caps and diffusers.
  - 2. Change the nozzles using the spanner code 340847 (code 340808 for double-flame burners or triple-flame burners) provided by our Technical Assistance Service, see table I, taking special care to ensure that the nozzle does not fall when it is remov...
  - 3. Position the diffusers and burner caps on the corresponding rings. The pan supports must also be positioned correctly.
- B) Adjusting the taps (Fig. 7):
  - 1. Set the control knobs to minimum.
  - 2. Remove the control knobs from the taps. It has a flexible rubber valve reinforcing ring. Press with the tip of the screwdriver to access the tap's adjusting screw.
  - 3. Adjust the minimum ring setting by turning the by-pass screw using a flat head screwdriver.
  - 1. Remove all pan supports, burner caps, diffusers and control knobs.
  - 2. Remove the screws from the burners.
  - 3. To reinstall the appliance, proceed in the reverse order to disassembly.
Indicaciones de seguridad
Antes de la instalacin
Preparacin del mueble (fig. 1-2)
- Separador
Instalacin del aparato (fig. 3)
- Nota
  - 1. Saque las grapas de la bolsa de accesorios y atornllelas en la posicin indicada dejando que giren libremente.
  - 2. Encastre y centre la placa de coccin.
  - 3. Gire las grapas y apritelas a fondo.
Desmontaje de la placa de coccin
Conexin de gas (fig. 4)
- : Peligro de fuga!
Conexin elctrica (fig. 5)
Cambio del tipo de gas
- A) Cambio de inyectores (fig. 6):
  - 1. Retire las parrillas, tapas de quemador y difusores.
  - 2. Cambie los inyectores usando la llave disponible a travs de nuestro servicio tcnico con cdigo 340847 (para quemadores de doble o triple llama cdigo 340808), ver tabla I, teniendo especial cuidado en que no se desprenda el inyector al retir...
  - 3. Coloque los difusores y las tapas de los quemadores en sus correspondientes fuegos. Adems deber colocar adecuadamente las parrillas.
- B) Reglaje de los grifos (fig. 7):
  - 1. Coloque los mandos en la posicin de mnimo.
  - 2. Retire los mandos de los grifos. Se encontrar con un retn de goma flexible. Presione con la punta del destornillador para acceder al tornillo de regulacin del grifo.
  - 3. Regule el fuego mnimo girando el tornillo bypass mediante un destornillador de punta plana.
  - 1. Quite todas las parrillas, tapas de los quemadores, difusores y mandos.
  - 2. Suelte los tornillos de los quemadores.
  - 3. Para volver a montar el aparato proceda de modo inverso al desmontaje.
Indications de scurit
Avant l'installation
Prparation du meuble (fig.1-2)
- Plancher intermdiaire
Installation de l'appareil (fig. 3)
- Remarque
  - 1. Sortez les agrafes de la poche des accessoires et vissez-les dans la position indique en les laissant tourner librement.
  - 2. Encastrez et centrez la plaque de cuisson.
  - 3. Tournez les agrafes et serrez-les fond.
Dmontage de la plaque de cuisson
Branchement de gaz (fig. 4)
- : Risque de fuites !
Branchement lectrique (fig. 5)
Changement du type de gaz
- A) Changement des injecteurs (fig. 6):
  - 1. Retirez les grilles, les couvercles de brleur et les diffuseurs.
  - 2. Changez les injecteurs en utilisant la cl disponible (rf. 340847) auprs de notre Service technique (pour brleurs double ou triple flamme, rf. 340808), cf. tableau I, en faisant particulirement attention ne pas dloger l'injecteur e...
  - 3. Placez les diffuseurs et les couvercles des brleurs sur leurs feux correspondants. Il faudra galement placer adquatement les grilles.
- B) Rglage des robinets (Fig. 7)
  - 1. Placez les boutons de commande sur la position minimum.
  - 2. Retirez les commandes des robinets. Vous trouverez alors une bague en caoutchouc flexible. Appuyez avec la pointe du tournevis afin d'accder la vis de rglage du robinet.
  - 3. Rglez le feu minimum en tournant la vis by-pass l'aide d'un tournevis pointe plate.
  - 1. tez tous les grilles, couvercles des brleurs, diffuseurs et boutons de commande.
  - 2. Desserrez les vis des brleurs.
  - 3. Pour remonter l'appareil, suivez la procdure inverse au dmontage.
Indicazioni di sicurezza
Prima dell'installazione
Preparazione del mobile (fig. 1-2)
- Ripiano intermedio
Installazione dell'apparecchio (fig. 3)
- Avvertenza
  - 1. Estrarre le graffe dal sacchetto degli accessori e avvitarle nella posizione indicata lasciando che girino liberamente.
  - 2. Incassare e centrare il piano di cottura.
  - 3. Girare le graffe e stringerle a fondo.
Smontaggio del piano di cottura
Attacco del gas (fig. 4)
- : Pericolo di fughe!
Connessione elettrica (fig. 5)
Cambio del tipo di gas
- A) Sostituzione degli iniettori (fig. 6):
  - 1. Rimuovere le griglie, i coperchi del bruciatore e i diffusori.
  - 2. Sostituire gli iniettori usando la chiave disponibile presso il nostro Servizio Tecnico, codice 340847 (340808 per i bruciatori a doppia o tripla fiamma); far riferimento alla tabella I, facendo particolare attenzione che l'iniettore non si distac...
  - 3. Collocare i diffusori e i coperchi dei bruciatori sui corrispondenti fuochi. Sistemare correttamente le griglie.
- B) Regolazione dei rubinetti (Fig. 7)
  - 1. Collocare le manopole nella posizione di minimo.
  - 2. Estrarre le manopole dei rubinetti. Si trover una tenuta in gomma flessibile. Esercitare pressione con la punta del cacciavite per accedere alla vite di regolazione del rubinetto.
  - 3. Regolare il fuoco minimo girando la vite di by-pass con un cacciavite a punta piatta.
  - 1. Togliere tutte le griglie, i coperchi dei bruciatori, i diffusori e le manopole.
  - 2. Rimuovere le viti dei bruciatori.
  - 3. Per rimontare l'apparecchio, invertire la procedura di smontaggio.
Veiligheidsaanwijzingen
Vr de installatie
Voorbereiding van het meubel (afb. 1-2)
- Tussenschot
Installatie van het apparaat (afb. 3)
- Aanwijzing
  - 1. Haal de klemmen uit de zak met accessoires en schroef deze vast in de aangeduide stand, zorg dat deze vrij draaien.
  - 2. Bouw de kookplaat in en centreer deze.
  - 3. Draai de klemmen helemaal aan.
Uitbouw van de kookplaat
Gasaansluiting (fig. 4)
- : Lekgevaar!
Elektrische aansluiting (fig. 5)
Verandering van gastype
- A) Vervangen van de inspuiters (afb. 6):
  - 1. Verwijder de roosters, hoedjes en verspreiders.
  - 2. Vervang de inspuiters met de sleutel die beschikbaar is via onze technische dienst, met code 340847 (voor branders met dubbele of driedubbele vlam code 340808), zie tabel I. Zorg dat de inspuiter niet losraakt bij het verwijderen of bevestigen hie...
  - 3. Plaats de verspreiders en de hoedjes op de overeenstemmende pitten. De roosters moeten bovendien naar behoren geplaatst worden.
- B) Afstelling van de kranen (Afb. 7)
  - 1. Zet de knoppen in de laagste stand.
  - 2. Haal de bedieningsknoppen van de kranen af. U treft een flexibele rubberen keerring aan. Voer met de punt van de schroevendraaier druk uit om bij de stelschroef van de kraan te komen.
  - 3. Stel de minimumstand af door de bypass bout te draaien met een schroevendraaier met een vlakke punt.
  - 1. Verwijder alle roosters, hoedjes, verspreiders en knoppen.
  - 2. Maak de bouten van de branders los.
  - 3. Ga, om het apparaat terug in te bouwen, op omgekeerde wijze te werk dan bij de demontage.
Wskazwki dotyczce bezpieczestwa
Przed zainstalowaniem
Przygotowanie mebla (rys. 1-2)
- Pyta przegradzajca
Instalacja urzdzenia (rys. 3)
- Wskazwka
  - 1. Wyj uchwyty z torebki z akcesoriami i przykrci we wskazanym pooeniu, tak by mogy swobodnie si obraca.
  - 2. Wsun pyt kuchenki i ustawi centralnie w wyciciu mebla.
  - 3. Obrci uchwyty i docisn je do koca.
Demonta pyty kuchenki
Podczanie gazu (rys. 4)
- : Niebezpieczestwo ulatniania si gazu!
Podczanie prdu (rys. 5)
Zmiana rodzaju gazu
- A) Wymiana dyszy (Rys. 6):
  - 1. Zdj ruszty, nakadki palnika i dyfuzory.
  - 2. Wymieni dysze za pomoc klucza dostpnego w naszym Serwisie Technicznym (kod produktu 340847, natomiast w przypadku palnikw o podwjnym lub potrjnym wiecu pomieni - kod produktu 340808), patrz tabela I, zwracajc szczegln uwag ...
  - 3. Zaoy dyfuzory i nakadki palnikw na odpowiednich palnikach. Ponadto naley prawidowo zaoy ruszty.
- B) Regulacja kurkw gazu (Rys. 7)
  - 1. Ustawi wszystkie pokrta w pooeniu minimalnym.
  - 2. Wyj pokrta z kurkw. Pod spodem znajduje si element zabezpieczajcy z elastycznej gumy. Nacisn element kocem rubokrtu, aby dosta si do ruby regulacyjnej kurka.
  - 3. Wyregulowa pomie minimalny, obracajc rub zczki przejciowej za pomoc rubokrtu z pask kocwk.
  - 1. Zdj wszystkie ruszty, nakadki z palnikw, dyfuzory oraz wyj pokrta.
  - 2. Wykrci ruby z palnikw.
  - 3. W celu ponownego zamontowania formy na tuszcz, naley wykona czynnoci demontau w odwrotnej kolejnoci:
Indicaes de segurana
Antes da instalao
Preparao do mvel (fig. 1-2)
- Fundo intermdio
Instalao do aparelho (fig. 3)
- Nota
  - 1. Retire os grampos do conjunto de acessrios e aparafuse-os na posio indicada, deixando que estes rodem livremente.
  - 2. Encastre e centre a placa de cozedura.
  - 3. Gire os grampos e aperte-os bem.
Desmontagem da placa de cozedura
Ligao a gs (fig. 4)
- : Perigo de fuga!
Ligao elctrica (fig. 5)
Mudana do tipo de gs
- A) Substituio dos injectores (fig. 6):
  - 1. Retire as grelhas, as tampas de queimador e os difusores.
  - 2. Substitua os injectores usando a chave disponibilizada pelo nosso servio de assistncia tcnica, com o cdigo 340847 (para queimadores de chama dupla ou tripla, cdigo 340808) (ver tabela I), tendo especial ateno para que o injector no...
  - 3. Coloque os difusores e as tampas dos queimadores nos respectivos lugares. Alm disso, deve colocar adequadamente as grelhas.
- B) Regulao das torneiras (Fig. 7)
  - 1. Coloque os comandos na sua posio mnima.
  - 2. Retire os comandos das torneiras. Ficar visvel um retentor de borracha flexvel. Pressione com a ponta de uma chave de fendas, para aceder ao parafuso de regulao da torneira.
  - 3. Regule a chama mnima rodando o parafuso bypass atravs de uma chave de fendas de ponta plana.
  - 1. Remova todas as grelhas, tampas dos queimadores, difusores e comandos.
  - 2. Desaperte os parafusos dos queimadores.
  - 3. Para voltar a montar o aparelho, proceda de modo inverso ao da desmontagem
(. 1-2)
(. 3)
- - 1. , .
  - 2. .
  - 3. .
(. 4)
- : !
(. 5)
- A) (. 6):
  - 1. , .
  - 2. , , 340847 ( ...
  - 3. . .
- B) (P. 7)
  - 1. .
  - 2. . . , ...
  - 3. , .
  - 1. , , .
  - 2. .
  - 3. , .

Blaupunkt 5G6B2P50 Installation Instructions

Pages 16

Year 0

Language(s)

of 16

Installation Instructions

16 pages

Instruction Manual

20 pages

Blaupunkt 5G6B2P50 Specification

The Blaupunkt 5G6B2P50 Hob is a state-of-the-art cooking appliance designed to enhance modern kitchen experiences with its advanced features and sleek design. This gas hob includes five burners, offering a versatile cooking setup suitable for various culinary needs. Each burner is made from high-quality materials, ensuring durability and efficient heat distribution. The hob is equipped with a central wok burner, which provides high-intensity heat ideal for stir-frying and rapid boiling.

The hob's surface is crafted from tempered glass, combining aesthetic appeal with practical functionality. It is easy to clean and resistant to scratches and heat. The control knobs are ergonomically designed and positioned at the front for easy access and precise flame regulation. Safety is a paramount feature of the Blaupunkt 5G6B2P50 Hob, as it incorporates a flame failure device for each burner. This technology automatically cuts off the gas supply if the flame is accidentally extinguished, preventing gas leaks and ensuring user safety.

Installation flexibility is a notable characteristic of this hob, with dimensions that fit standard kitchen counter cutouts. It is compatible with both natural gas and LPG, catering to different household gas supply systems. The Blaupunkt 5G6B2P50 Hob combines functionality with a contemporary design, making it an ideal choice for users seeking efficient cooking solutions without compromising on style or safety. Its robust features and user-friendly operation make it a reliable and attractive addition to any modern kitchen setting.

Blaupunkt 5G6B2P50 F.A.Q.

How do I turn on the Blaupunkt 5G6B2P50 Hob?

To turn on the Blaupunkt 5G6B2P50 Hob, press the power button located on the control panel. Then, select the desired cooking zone and set the power level using the plus and minus buttons.

What should I do if the hob doesn't heat up?

If the hob doesn't heat up, ensure it is properly connected to a power source. Check the circuit breaker and make sure it hasn't tripped. If the issue persists, contact customer support for further assistance.

How can I clean the Blaupunkt 5G6B2P50 Hob?

To clean the hob, first ensure it is turned off and cool. Use a damp cloth and a mild detergent to wipe the surface. Avoid using abrasive cleaners or scouring pads, as they may scratch the surface.

Can I use cast iron cookware on the Blaupunkt 5G6B2P50 Hob?

Yes, you can use cast iron cookware on the Blaupunkt 5G6B2P50 Hob. However, ensure the base of the cookware is smooth to prevent scratching the glass surface.

Why does the hob display an error code?

Error codes are displayed when there is a malfunction or incorrect operation. Refer to the user manual for specific error code meanings and solutions. If needed, contact customer support.

How do I lock the controls on my hob to prevent accidental use?

To lock the controls, press and hold the lock button on the control panel until the lock indicator light turns on. This will prevent accidental use.

What is the best way to handle a power outage while using the hob?

In the event of a power outage, turn off all cooking zones and the control panel. Once power is restored, you can turn the hob back on and resume cooking.

How can I adjust the timer on the Blaupunkt 5G6B2P50 Hob?

To adjust the timer, select the desired cooking zone and press the timer button. Use the plus and minus buttons to set the desired time. The timer will automatically start counting down.

Why is there a buzzing noise coming from the hob?

Some noise is normal, especially when using high power settings or certain types of cookware. If the noise is unusual or persistent, check if the cookware is centered correctly and ensure the hob is on a stable surface.

How often should I perform maintenance checks on my hob?

Regular maintenance checks should be performed at least once every six months. This includes checking the condition of the power cord, ensuring the controls are functioning properly, and cleaning the hob surface.