Audio-Technica ATH-ANC20 User Manual
![Audio-Technica ATH-ANC20 Headphones manual cover](/images/GnudZnJhSpifnMTxjWTuFbDh/thumbs/thumb175x175.webp)
To activate the noise-cancelling feature, slide the ANC switch located on the earcup to the 'on' position. You should hear a slight hiss indicating that the active noise cancellation is now working.
First, check the connection to your audio device to ensure it is secure. Then verify that the device's volume is turned up. If the problem persists, try using a different audio cable or device to isolate the issue.
Yes, you can use the headphones without batteries, but the noise-cancelling feature will not be available. They will function as regular passive headphones in this mode.
To replace the ear pads, gently pull the existing pads away from the earcup. Align the new pads with the mounting posts and press them into place until they secure firmly.
A slight hissing sound is normal when the noise-cancelling feature is activated due to the internal electronics working to cancel out external noise.
Use a soft, dry cloth to wipe the exterior parts. Avoid using any solvents or abrasive cleaners. For the ear pads, you can use a slightly damp cloth and let them air dry completely.
First, replace the AAA battery in the left earcup. If the issue persists, check the connections and ensure the ANC switch is in the 'on' position. If it still doesn't work, contact Audio-Technica customer support for further assistance.
Yes, the ATH-ANC20 headphones are designed to be used on airplanes. They come with an airplane adapter that fits into the dual-prong audio jacks commonly found on planes.
The AAA battery used in the ATH-ANC20 headphones typically lasts for about 40 hours of noise-cancelling use. Battery life may vary depending on usage and battery type.
Store your headphones in the provided carrying pouch to protect them from dust and damage. Make sure they are turned off and fold them gently before placing them in the pouch.