Audio-Technica AT-OC9XSL User Manual

Audio-Technica AT-OC9XSL Cartridge manual cover

Pages 2

Year 2019

Language(s)

of 2

Audio-Technica AT-OC9XSL Cartridge Specification

The Audio-Technica AT-OC9XSL is a high-performance moving coil cartridge designed for audiophiles seeking precision and clarity in sound reproduction. It features a special line contact stylus, known for its ability to extract intricate details from vinyl records while minimizing distortion and wear. The stylus is mounted on a boron cantilever, which offers superior rigidity and reduced mass, contributing to enhanced tracking performance and dynamic response.

This cartridge incorporates dual moving coils, meticulously positioned to ensure excellent channel separation and extended frequency response, spanning from 20 to 50,000 Hz. The coils are made from PCOCC (Pure Copper by Ohno Continuous Casting) wire, which ensures minimal signal loss and optimal signal purity. The AT-OC9XSL boasts a low output voltage of 0.4 mV, necessitating the use of a compatible phono preamp or step-up transformer for optimal performance.

The body of the AT-OC9XSL is constructed from a rigid, resonance-dampening aluminum alloy, reducing unwanted vibrations and enhancing sound clarity. The cartridge's lightweight design, weighing in at 7.6 grams, allows for compatibility with a wide range of tonearms. With a recommended tracking force of 2.0 grams, it achieves an optimal balance between stylus pressure and groove tracking ability.

Overall, the Audio-Technica AT-OC9XSL is engineered for those who demand uncompromised audio fidelity from their analog systems. Its sophisticated design and high-quality materials ensure it delivers a nuanced and immersive listening experience, making it a valuable addition to any high-end turntable setup.

Audio-Technica AT-OC9XSL Cartridge F.A.Q.

What is the recommended tracking force for the Audio-Technica AT-OC9XSL cartridge?

The recommended tracking force for the AT-OC9XSL cartridge is 2.0 grams.

How do I properly align the Audio-Technica AT-OC9XSL cartridge on a turntable?

To align the cartridge, use a protractor specifically designed for your turntable's tonearm. Align the stylus tip with the alignment points on the protractor and ensure the cartridge body is parallel to the lines.

What type of stylus does the AT-OC9XSL have, and what are its benefits?

The AT-OC9XSL features a special line contact stylus, which provides excellent high-frequency response and improved tracking ability, minimizing distortion and record wear.

How should I clean the stylus of the AT-OC9XSL cartridge?

Use a stylus brush to gently remove dust and debris from the stylus. Brush from back to front to prevent damaging the stylus. Avoid using liquid cleaners unless specified safe by the manufacturer.

What type of phono preamp is recommended for use with the AT-OC9XSL cartridge?

The AT-OC9XSL is a moving coil cartridge, so it requires a phono preamp that supports moving coil (MC) input with adjustable gain settings to match the cartridge's output level.

How can I minimize hum or noise when using the AT-OC9XSL cartridge?

Ensure all connections are secure and check grounding wires. Keep the turntable and cartridge away from electronic devices that may cause interference. Use high-quality, shielded cables.

What is the output voltage of the AT-OC9XSL cartridge, and why is it important?

The output voltage of the AT-OC9XSL is 0.4 mV. This low output is typical for moving coil cartridges and requires a compatible phono preamp with adequate gain.

How often should I replace the stylus on the AT-OC9XSL cartridge?

The stylus should typically be replaced after approximately 1,000 hours of playtime, depending on usage conditions and maintenance. Regular cleaning can extend its lifespan.

Can I use the AT-OC9XSL cartridge on any turntable?

The AT-OC9XSL can be used on most turntables with a compatible tonearm that supports moving coil cartridges. Ensure the tonearm can handle the tracking force and compliance of the cartridge.

What is the frequency response range of the AT-OC9XSL cartridge?

The frequency response range of the AT-OC9XSL is 20-50,000 Hz, providing a wide range of audio reproduction suitable for high-fidelity sound.