Arrma ARA7604V2 Instruction Manual
![Arrma ARA7604V2 Truck manual cover](/images/PjEuNxsATYbzsRpdGnhbvmiS/thumbs/thumb175x175.webp)
The recommended battery type for the Arrma ARA7604V2 Truck is a 2S or 3S LiPo battery with a minimum discharge rate of 35C.
Check the battery connection, ensure the transmitter and receiver are paired, and verify that the ESC is correctly calibrated. Also, inspect for any loose wires or damaged components.
After running in wet conditions, clean and dry the truck thoroughly, lubricate the bearings, and check for any water ingress in the electronics compartment.
To adjust the suspension, change the shock oil to a different viscosity, alter the spring tension by adjusting the preload clips, and experiment with different shock positions on the shock towers.
Check the servo connection to the receiver, ensure the servo horn is not stripped, and verify that the transmitter settings are correct. If the issue persists, consider testing with a different servo.
Tire replacement frequency depends on usage and terrain. Regularly inspect for wear and replace tires when the tread is significantly worn or if there are any visible damages.
Yes, you can upgrade the motor. Consider the power handling capacity of the ESC, the drivetrain components, and ensure the gear ratio is appropriate for the new motor's specifications.
Use a brush or compressed air to remove loose dirt and debris, wipe down the truck with a damp cloth, and ensure all components are dry before storing. Avoid using water directly on electronic components.
Reduced run time may be caused by a degraded battery, excessive drivetrain friction, or incorrect gear mesh. Check for these issues and replace the battery if necessary.
Clean the truck, disconnect and store the battery at a proper storage voltage, and keep the truck in a cool, dry place away from direct sunlight.