ADX Firefight MK06 ADXMK06B22 Instruction Manual
![ADX Firefight MK06 ADXMK06B22 Keyboard manual cover](/images/WaBwQmLPGhVRtiGFwWAdoHLg/thumbs/thumb175x175.webp)
To change the RGB lighting, press the 'FN' key along with the 'RGB' key to cycle through the available lighting modes. You can also customize the lighting using the software provided with the keyboard.
First, ensure the keyboard is properly connected to the computer. Try unplugging and re-plugging the USB cable. If the issue persists, check for driver updates or test the keyboard on another device to rule out hardware failure.
To clean the keyboard, unplug it and use a soft, damp cloth to wipe the surface. For deeper cleaning, you can carefully remove the keycaps using a keycap puller and clean the area underneath with compressed air.
Yes, the ADX Firefight MK06 keyboard is compatible with Mac computers. However, certain function keys might not work as intended without additional software.
To reset the keyboard to factory settings, hold down the 'FN' key and the 'ESC' key for about 5 seconds until the keyboard lights flash, indicating the reset has been successful.
Check the keyboard language settings on your computer. Ensure it matches the layout of your keyboard. If the issue continues, try reinstalling the keyboard drivers.
Visit the manufacturer's website to download the latest firmware update. Follow the provided instructions to install the update using the USB connection.
Ensure the keyboard is connected to a powered USB port. Check if the lighting is turned off by pressing the 'FN' key and the 'RGB' key. If it still doesn't light up, there might be a hardware issue.
Yes, you can program macros using the keyboard's software. Install the software from the manufacturer's website, and follow the instructions to create and assign macros to specific keys.
The ADX Firefight MK06 keyboard typically comes with a one-year warranty. Check the warranty card or the manufacturer's website for specific terms and conditions.