Advent ASP21BK17 Instruction Manual
![Advent ASP21BK17 manual cover](/images/FVJpWucfGBZdxKnamRGjerZD/thumbs/thumb175x175.webp)
To pair your Advent ASP21BK17 Speaker, turn on the speaker and press the Bluetooth button until the LED starts flashing. Then, enable Bluetooth on your device and select 'Advent ASP21BK17' from the list of available devices.
If your Advent ASP21BK17 Speaker won't turn on, ensure that the battery is charged. Connect it to a power source using the included USB cable and charge for at least 15 minutes before attempting to turn it on again.
To reset your speaker, press and hold the power button for approximately 10 seconds until the LED indicator flashes, then release the button.
Ensure the volume is turned up on both the speaker and the connected device. Check that the speaker is paired with the device correctly, and make sure the audio is not muted on your device.
Use a soft, dry cloth to wipe the exterior of the speaker. Avoid using abrasive cleaners or submerging the speaker in water, as this can damage the unit.
The Advent ASP21BK17 Speaker offers up to 8 hours of playtime on a full charge, depending on the volume level and music content.
Yes, you can use the Advent ASP21BK17 Speaker while it is charging. Simply connect it to a power source and continue playback as usual.
Currently, the Advent ASP21BK17 Speaker does not support user-updatable firmware. Any updates would require service from an authorized technician.
Ensure no obstructions are between the speaker and the connected device, and keep them within the recommended range (usually up to 33 feet). Try resetting the Bluetooth connection by forgetting the speaker on your device and re-pairing it.
The Advent ASP21BK17 Speaker is not water-resistant. Avoid exposing it to water or moisture to prevent damage.