Advent AKBWL15 Instruction Manual
![Advent AKBWL15 manual cover](/images/fafnoeNSHxCEreGCYTorrbgX/thumbs/thumb175x175.webp)
To connect the Advent AKBWL15 keyboard, insert the wireless USB receiver into a USB port on your computer. Turn on the keyboard using the switch located at the back. Your computer should automatically detect and install the necessary drivers.
First, check if the keyboard's power switch is turned on. Replace the batteries if necessary. Ensure the wireless receiver is securely connected to the USB port. Try reconnecting by turning the keyboard off and on. Restart your computer if required.
Turn off the keyboard and remove the batteries. Use a soft, damp cloth to gently wipe the surface. Avoid using strong chemicals. For deeper cleaning, use compressed air to remove dust between keys.
Yes, the Advent AKBWL15 keyboard is compatible with Mac systems. Simply plug in the wireless receiver and the macOS should recognize the keyboard automatically.
Turn the keyboard off and flip it over. Slide the battery compartment cover open and remove the old batteries. Insert new AA batteries, ensuring the correct polarity, and close the cover.
Ensure that no debris is obstructing the keys. Try using compressed air to clean around the affected keys. If the issue persists, reconnect the keyboard and restart the computer. For hardware issues, contact customer support.
Adjust the keyboard sensitivity via your operating system's keyboard settings. For Windows, go to Control Panel > Keyboard. For macOS, navigate to System Preferences > Keyboard. Adjust the response rate as needed.
The wireless range of the Advent AKBWL15 keyboard is up to 10 meters (approximately 33 feet) in an open area. Obstacles like walls and furniture may reduce the effective range.
Yes, if your Smart TV supports USB keyboards, you can use the Advent AKBWL15. Plug the receiver into the TV's USB port and follow any on-screen instructions to connect.
To reset the keyboard, turn it off, remove the batteries, and leave it unpowered for a few minutes. Reinsert the batteries and turn it on to restore default settings.