Advent ADE-300N User Manual

To set up your Advent ADE-300N Camera, connect the camera to a power source and your network router using an Ethernet cable. Install the camera's software from the included CD or download it from the official website. Follow the on-screen instructions to complete the setup process.
Ensure that the Wi-Fi network name and password are correct. Make sure the camera is within range of the router. Restart the camera and router, and try reconnecting. If issues persist, check for firmware updates or reset the camera to factory settings.
To access the camera remotely, ensure that it is connected to the internet. Use the provided mobile app or web portal, log in with your credentials, and select your camera from the list of devices. Ensure port forwarding is set up on your router if required.
Locate the reset button on the camera. Press and hold the button for about 10 seconds until the camera restarts. This will reset all settings to factory defaults. Ensure you back up important settings before performing a reset.
Visit the manufacturer's website and download the latest firmware version. Access the camera's settings via the web interface, navigate to the firmware update section, and upload the downloaded firmware file. Follow on-screen instructions to complete the update.
Check the camera lens for dirt or smudges and clean it with a soft, dry cloth. Adjust the focus ring if your camera has one. Ensure the camera is positioned correctly and that the lighting conditions are adequate.
The Advent ADE-300N Camera supports local storage via a microSD card and cloud storage if available through the manufacturer's service. Check the camera's specifications for supported microSD card sizes and compatibility.
Access the camera's settings menu via the app or web interface. Navigate to the motion detection settings, enable motion detection, and configure the sensitivity and alert preferences as desired. Save the settings once configured.
Check if your camera model supports integration with smart home systems like Amazon Alexa, Google Home, or Apple HomeKit. Follow the manufacturer's instructions for linking the camera to your preferred smart home ecosystem.
Ensure the night vision mode is enabled in the camera settings. Check for obstructions on the infrared LED lights. If the problem persists, reboot the camera or check for firmware updates that may address this issue.