Acura TSX 200 Advanced Guide
![Acura TSX 200 Sedan manual cover](/images/KCPGQmQKvnujuQfUbymxXhdO/thumbs/thumb175x175.webp)
The recommended oil type for the 2008 Acura TSX is 5W-30 synthetic oil for optimal performance and engine protection.
The timing belt on an Acura TSX 200 Sedan should be replaced every 105,000 miles or 7 years, whichever comes first.
The recommended tire pressure for the 2010 Acura TSX Sedan is 33 psi for both the front and rear tires.
To reset the maintenance light, turn on the ignition, press the "Select/Reset" button until the oil life screen appears, hold the button for 10 seconds until the oil life begins to blink, then release and hold again until it resets to 100%.
Common causes for the "Check Engine" light include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or malfunctioning spark plugs.
Improve fuel efficiency by maintaining proper tire pressure, using recommended oil, avoiding rapid acceleration, and ensuring regular maintenance such as air filter replacement.
To replace a headlight bulb, open the hood, disconnect the electrical connector from the back of the headlight assembly, remove the old bulb, and install the new one by reversing the process.
The Acura TSX 200 Sedan requires DOT 3 or DOT 4 brake fluid for optimal braking performance.
If the air conditioning is not blowing cold air, check for refrigerant leaks, ensure the compressor is functioning, and verify that the condenser is not blocked or damaged.
The Acura TSX 200 Sedan is not designed for towing and does not have a specified towing capacity. It is recommended to avoid towing with this vehicle.