Acura ILX Tech 2014 Advanced Guide
![Acura ILX Tech 2014 Sedan manual cover](/images/OyijsnlLZJuhNHakzOgFpHOj/thumbs/thumb175x175.webp)
To reset the maintenance light on a 2014 Acura ILX Tech, turn the ignition to the "ON" position without starting the engine. Use the "SEL/RESET" button on the steering wheel to navigate to the maintenance minder screen. Hold the "SEL/RESET" button for about 10 seconds until the maintenance light starts to blink, then release and hold the button again for 5 more seconds until the light resets.
The 2014 Acura ILX Tech typically requires 0W-20 synthetic oil for optimal performance and fuel efficiency. Always refer to your owner's manual for confirmation and any specific requirements.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements. Keep tires properly inflated, drive at steady speeds, and avoid rapid acceleration and heavy braking. Removing unnecessary weight from the vehicle can also help.
Common causes for a check engine light in a 2014 Acura ILX Tech include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the ignition system such as spark plugs or ignition coils. A diagnostic scan can help pinpoint the exact issue.
To pair your phone, ensure Bluetooth is enabled on your device. Press the "Phone" button on the audio system, and select "Yes" to pair a new device. Follow the on-screen prompts and select your car system from your phone's Bluetooth menu. Enter the passcode if prompted.
The recommended tire pressure for a 2014 Acura ILX Tech is typically 33 psi for both the front and rear tires. It's best to check your owner's manual or the placard on the driver’s door jamb for the most accurate specifications.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. For dusty or harsh environments, more frequent changes may be necessary. Consult your owner's manual for specific intervals.
Possible causes for vibration or shaking when driving include unbalanced or misaligned wheels, worn suspension components, or damaged tires. A professional inspection is recommended to diagnose and resolve the issue.
To adjust the headlights on a 2014 Acura ILX Tech, locate the adjustment screws on the headlight assembly. Park the car on a level surface facing a wall and adjust the screws to align the headlights to the desired height and angle, ensuring proper visibility without blinding other drivers.
To jump-start the vehicle, position a working car close to the ILX without them touching. Connect the red positive cable to the positive terminals on both batteries, then the black negative cable to the negative terminal on the good battery, and finally to an unpainted metal surface on the ILX. Start the working car, then the ILX. Remove cables in reverse order once started.